KPRO custom clutch switch in use with e22 ?

K-Series Programmable ECU Calibration updates / downloads
TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

KPRO custom clutch switch in use with e22 ?

Post by TJAPZ0RRO »

If I use e22 for FTS, will my brake lights light up when I press the clutch ?

- TJAP
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: KPRO custom clutch switch in use with e22 ?

Post by Spunkster »

That input has nothing to do with your brake lights. They use a separate switch.
TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

Re: KPRO custom clutch switch in use with e22 ?

Post by TJAPZ0RRO »

Spunkster wrote:That input has nothing to do with your brake lights. They use a separate switch.
Thanks Spunkster, I'm going to use e22 : )
TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

Re: KPRO custom clutch switch in use with e22 ?

Post by TJAPZ0RRO »

Ah ok, I need +12v, what is the best place to get +12v on an EP3 ?

- TJAP
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: KPRO custom clutch switch in use with e22 ?

Post by Spunkster »

The best place for switched 12v is from the empty spots in the under dash fuse box.
TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

Re: KPRO custom clutch switch in use with e22 ?

Post by TJAPZ0RRO »

Spunkster wrote:The best place for switched 12v is from the empty spots in the under dash fuse box.
Ok, going to use that spot in a while, currently I am using E29, because getting ground was the easyst (cel lights up when I press the clutch >.<) But now I am confused, I pinned only to E29 and my EPS icon flashes some times. Whats wrong ?
Last edited by TJAPZ0RRO on Tue Jun 03, 2014 6:40 am, edited 1 time in total.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: KPRO custom clutch switch in use with e22 ?

Post by Spunkster »

I'm sorry, but I'm not quite understanding your issue.
TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

Re: KPRO custom clutch switch in use with e22 ?

Post by TJAPZ0RRO »

Spunkster wrote:I'm sorry, but I'm not quite understanding your issue.
The EPS and SRS lights flash, the only thing I did was ground the clutch switch and pulled a cable to E29.

This is the first time that they flash.

http://youtu.be/dkjJDHJdqaM
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: KPRO custom clutch switch in use with e22 ?

Post by Spunkster »

Undo what you have done and see if it acts normally. If it does it sounds like you have wired something incorrectly.
TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

Re: KPRO custom clutch switch in use with e22 ?

Post by TJAPZ0RRO »

Spunkster wrote:Undo what you have done and see if it acts normally. If it does it sounds like you have wired something incorrectly.
I disconected the switch and the wire to E29, now the lights stoped flashing.
And I know for sure that my wire was connected to the switch and E29 only.

So I dont know why the lights flashed ...
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: KPRO custom clutch switch in use with e22 ?

Post by Spunkster »

Don't use E29, use one of the other inputs.
TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

Re: KPRO custom clutch switch in use with e22 ?

Post by TJAPZ0RRO »

Spunkster wrote:Don't use E29, use one of the other inputs.
Like ?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: KPRO custom clutch switch in use with e22 ?

Post by Spunkster »

Why not use E22 as you originally said you were going to
TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

Re: KPRO custom clutch switch in use with e22 ?

Post by TJAPZ0RRO »

Spunkster wrote:Why not use E22 as you originally said you were going to
True,

Im going to try E22.
TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

Re: KPRO custom clutch switch in use with e22 ?

Post by TJAPZ0RRO »

Ok, I'm pretty clue less at the moment, I've pinned from E29 to E22 and now it doesn't work .. And if I pin it back to E29 it works, so my switch is working .. If I in invert on E22 it works, always .. clutch or no clutch .. Whats wrong (I know for sure E22 was used) ?

Hope for some help ..

Edit: I switched the cable and input on KPRO ..
Post Reply