Page 1 of 1

Toda I/RH/E Base Map

Posted: Thu Aug 14, 2014 1:32 pm
by ashinskyd
I have an 05 RSX-S with an Invidia RH, SRI, and Tanabe Catback. The toda basemap calibration says it is meant for the k20a2, NOT the k20z1. Am I still safe using this basemap before I have it dyno tuned?

Re: Toda I/RH/E Base Map

Posted: Sat Aug 16, 2014 7:12 am
by tkane4389
I wouldn't recommend that calibration, especially if daily driving the vehicle. Use the z1 map and leave closed loop engaged until you get tuned.