06 K24A2 Calibration

K-Series Programmable ECU Calibration updates / downloads
Post Reply
joeywygand
Posts: 1
Joined: Wed Sep 21, 2016 4:35 pm

06 K24A2 Calibration

Post by joeywygand »

I am new to this forum and have tried searching. I have a 06 RSX Type S, i just swapped in an 06 K24A2. Still using the k20z1 transmission. Been running the 04-05tsx calibration but i want one specifically for the 06-08. The only calibrations ive been able to find are for a 45 or a 50 degree vtc but i am still using the stock tsx vtc. If anyone can help me with a calibration to try i would appreciate it.

06 K24A2
k20z1 6speed transmission
AEM V2 Intake
PRB Intake Manifold
Ktuned Race Header
gReddy 2.25" exhaust

Thanks in advance.
Diaz90
Posts: 2
Joined: Fri Mar 23, 2018 7:36 pm

Re: 06 K24A2 Calibration

Post by Diaz90 »

did you ever find a calibration for it? i swapped one into my ep3 using the base k24 map and car is running lean
Lewiep3
Posts: 1
Joined: Wed Apr 11, 2018 6:41 pm

Re: 06 K24A2 Calibration

Post by Lewiep3 »

The reason its running lean is the possibility of the throttle position sensor being backwards. If you're using the tsx throttle body, tps sensors you might have to swap your wiring around. Check what your live data says about throttle position when driving. It should sit around 15-30 % at idle and when WOT it should read 100%
Diaz90
Posts: 2
Joined: Fri Mar 23, 2018 7:36 pm

Re: 06 K24A2 Calibration

Post by Diaz90 »

Lewiep3 wrote: Thu Apr 12, 2018 8:26 am The reason its running lean is the possibility of the throttle position sensor being backwards. If you're using the tsx throttle body, tps sensors you might have to swap your wiring around. Check what your live data says about throttle position when driving. It should sit around 15-30 % at idle and when WOT it should read 100%
Using ep3 manifold/TB and TB sensors from ep3...I need a better laptop that works with out being plugged in so I can use it lol
Post Reply