Base map needed for turbo 02 rsx k20a2

K-Series Programmable ECU Calibration updates / downloads
Post Reply
Srolen26
Posts: 6
Joined: Wed May 31, 2017 8:22 am

Base map needed for turbo 02 rsx k20a2

Post by Srolen26 » Wed May 31, 2017 8:25 am

Loooking for a base map for a turbo rsx , New here please forgive me if i missed one already posted. Its pretty much stock aside from turbo and 750cc injectors and a 70mm throttle body . Catback 2 1/2 . Kpro ecu . Thanks anyone who can help me .

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Base map needed for turbo 02 rsx k20a2

Post by Zperformance » Sun Jun 04, 2017 8:11 am

What brand is your injector and is your injector low or high impendencies? what fuel

Srolen26
Posts: 6
Joined: Wed May 31, 2017 8:22 am

Re: Base map needed for turbo 02 rsx k20a2

Post by Srolen26 » Tue Jun 06, 2017 5:42 am

The injectors are actually high resistance bosch ev14 630cc fuel 93 octane.

Srolen26
Posts: 6
Joined: Wed May 31, 2017 8:22 am

Re: Base map needed for turbo 02 rsx k20a2

Post by Srolen26 » Thu Jun 08, 2017 11:04 am

Can anyone help me out on this one ? Lets say ill be pushing 10 lb boost

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Base map needed for turbo 02 rsx k20a2

Post by Zperformance » Fri Jun 09, 2017 9:42 am

Im assuming you still have your o2 sensor installed? I would advice hooking up a Wideband and adjust your AFR to spec. Give me some feedback i will help with what i can!
Attachments
RSX turbo Base.kal
I will not be responsible for any damage that occured
(170.19 KiB) Downloaded 176 times

Srolen26
Posts: 6
Joined: Wed May 31, 2017 8:22 am

Re: Base map needed for turbo 02 rsx k20a2

Post by Srolen26 » Sun Jun 11, 2017 7:37 am

I do have a wideband . THanks hopefully this will give me a start so i can get it running .

Srolen26
Posts: 6
Joined: Wed May 31, 2017 8:22 am

Re: Base map needed for turbo 02 rsx k20a2

Post by Srolen26 » Sun Jun 11, 2017 7:39 am

I forgot to include that i got a 4 bar map sensor from diytuning!

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Base map needed for turbo 02 rsx k20a2

Post by Zperformance » Tue Jun 20, 2017 8:18 pm

Richen AFR from idle and daily. Let me know how it runs and do
Attachments
RSX base Richen AFR.kal
*I Will not be responsible for any damage that occur
(164.82 KiB) Downloaded 164 times

Rhddc5
Posts: 3
Joined: Mon Jul 24, 2017 9:03 pm

Re: Base map needed for turbo 02 rsx k20a2

Post by Rhddc5 » Mon Jul 24, 2017 9:11 pm

Zperformance
Can you please give me a base map for

Stock k20a2
Gt35 turbo
Id1050x injectors
Running e85
On kpro
I have AFR

Post Reply