Page 1 of 1

Base map needed for turbo 02 rsx k20a2

Posted: Wed May 31, 2017 8:25 am
by Srolen26
Loooking for a base map for a turbo rsx , New here please forgive me if i missed one already posted. Its pretty much stock aside from turbo and 750cc injectors and a 70mm throttle body . Catback 2 1/2 . Kpro ecu . Thanks anyone who can help me .

Re: Base map needed for turbo 02 rsx k20a2

Posted: Sun Jun 04, 2017 8:11 am
by Zperformance
What brand is your injector and is your injector low or high impendencies? what fuel

Re: Base map needed for turbo 02 rsx k20a2

Posted: Tue Jun 06, 2017 5:42 am
by Srolen26
The injectors are actually high resistance bosch ev14 630cc fuel 93 octane.

Re: Base map needed for turbo 02 rsx k20a2

Posted: Thu Jun 08, 2017 11:04 am
by Srolen26
Can anyone help me out on this one ? Lets say ill be pushing 10 lb boost

Re: Base map needed for turbo 02 rsx k20a2

Posted: Fri Jun 09, 2017 9:42 am
by Zperformance
Im assuming you still have your o2 sensor installed? I would advice hooking up a Wideband and adjust your AFR to spec. Give me some feedback i will help with what i can!

Re: Base map needed for turbo 02 rsx k20a2

Posted: Sun Jun 11, 2017 7:37 am
by Srolen26
I do have a wideband . THanks hopefully this will give me a start so i can get it running .

Re: Base map needed for turbo 02 rsx k20a2

Posted: Sun Jun 11, 2017 7:39 am
by Srolen26
I forgot to include that i got a 4 bar map sensor from diytuning!

Re: Base map needed for turbo 02 rsx k20a2

Posted: Tue Jun 20, 2017 8:18 pm
by Zperformance
Richen AFR from idle and daily. Let me know how it runs and do

Re: Base map needed for turbo 02 rsx k20a2

Posted: Mon Jul 24, 2017 9:11 pm
by Rhddc5
Zperformance
Can you please give me a base map for

Stock k20a2
Gt35 turbo
Id1050x injectors
Running e85
On kpro
I have AFR