USDM a3 Calibration on JDM Engine?!

K-Series Programmable ECU Calibration updates / downloads
Locked
torqueless
Posts: 2
Joined: Thu May 31, 2007 7:58 am

USDM a3 Calibration on JDM Engine?!

Post by torqueless »

I have the usdm calibration for the a3 toda racing camshafts to be used on the rsx type s. I own a JDM DC5 honda integra type r.
What i want to know is will the cam angle settings on the usdm a3 calibration work the way it should on a jdm engine with the a3 camshafts.

If not can anyone supply me with the JDM calibration for the a3 camshafts by toda racing.

User avatar
Spunkster
Site Admin
Posts: 18801
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

The cam angles are probably goign to be similar, but it is impossible to say until you put it on the dyno to see.

torqueless
Posts: 2
Joined: Thu May 31, 2007 7:58 am

Post by torqueless »

Well the issue i face is that there is 1 dyno in Barbados and it is hardly every working. :evil: & since the best way to tune cam angles is via a dyno i need to know for sure.

kesnut
Posts: 155
Joined: Tue Oct 29, 2002 7:31 am
Location: Trinidad W.I.
Contact:

Post by kesnut »

hi from trinidad with a type R, i was playing with the maps last night, the base
and if you use the k20a cold air intake dyno tuned, was a very good base map to start with, we just up the cams by 5 in the last 3 columns and that made 4hp on the powerband. our motor is stock and i must second Spunkster dyno is a MUST.

Locked