I've been playing with this tune for a bit and cannot tune properly for the motor to start up on cold starts. Normally I have to hold the throttle for about a minute then it will idle out.
Setup is Ls Vtec around 10:1 with Pro 1's and 310cc injectors. (Turbo Build)
Attached is my map, any recommendations would be appreciated!
Need Skunk2 Pro1 cold start help
-
- Posts: 28
- Joined: Fri Feb 29, 2008 1:06 pm
Need Skunk2 Pro1 cold start help
- Attachments
-
- Victor X Pro 1s.skl
- (33.34 KiB) Downloaded 125 times
93 DA
Ls/Vtec
S300
Ls/Vtec
S300
-
- Posts: 28
- Joined: Fri Feb 29, 2008 1:06 pm
-
- Posts: 28
- Joined: Fri Feb 29, 2008 1:06 pm
-
- Posts: 28
- Joined: Fri Feb 29, 2008 1:06 pm
-
- Posts: 116
- Joined: Tue Jun 23, 2009 10:51 pm
is your map tune?TTR wrote:This is my map from a 13:1 LS VTEC. It starts and idles from -5 F up. Where are your cams degreed in? Let me know if it helps.
- Attachments
-
- PRO_1.skl
- this map
- (36.01 KiB) Downloaded 114 times
-
- Posts: 28
- Joined: Fri Feb 29, 2008 1:06 pm
Ok so I got it figured out Put a new IAC on the car and changed some parameter values pertaining to start u as well.
- Attachments
-
- Victor X Pro 1s.skl
- (33.62 KiB) Downloaded 130 times
93 DA
Ls/Vtec
S300
Ls/Vtec
S300