two step problems PLZ HELP!!!!!

s300 and SManager software questions & answers
Post Reply
92-civic eg
Posts: 3
Joined: Thu Aug 04, 2011 1:11 pm

two step problems PLZ HELP!!!!!

Post by 92-civic eg »

hey everyone, so yesturday i was boosting on the highway when all of a sudden my car didint let me go passed 5500 rpm and thats what i have my two step set at and its wierd because mi two step only turnes on when im at a dead stop. but today on my way to work it was working fine and just before i got home i started again......sooooo can someone plz help me out
AREA876
Posts: 420
Joined: Tue Jun 15, 2010 6:14 am
Location: Jamaica

Re: two step problems PLZ HELP!!!!!

Post by AREA876 »

Post calibration and datalog of the problem

Do you have the protection setup?
92-civic eg
Posts: 3
Joined: Thu Aug 04, 2011 1:11 pm

Re: two step problems PLZ HELP!!!!!

Post by 92-civic eg »

The only protection setup I have is cold start so it wont let me boost when the car temp is cool
jiggacivic
Posts: 35
Joined: Wed Oct 08, 2008 12:55 pm

Re: two step problems PLZ HELP!!!!!

Post by jiggacivic »

check your VSS
92-civic eg
Posts: 3
Joined: Thu Aug 04, 2011 1:11 pm

Re: two step problems PLZ HELP!!!!!

Post by 92-civic eg »

mi current configuration
Attachments
Alfonzo b18 Turbo 6 lbs stock.skl
mi current configuration
(32.74 KiB) Downloaded 65 times
surfingsk8r
Posts: 52
Joined: Tue Jul 26, 2011 7:00 am

Re: two step problems PLZ HELP!!!!!

Post by surfingsk8r »

jiggacivic wrote:check your VSS
this ^^^
surfingsk8r
Posts: 52
Joined: Tue Jul 26, 2011 7:00 am

Re: two step problems PLZ HELP!!!!!

Post by surfingsk8r »

also after reviewing your parameters ti looks like you have your 2 step set at 4500 not 5500 likeyou said you were having the problem so I would try and get a datalog of the issue and also increase the mph on the 2 step to 6 mph cause vss doesnt really start to read correctly untill after 3 to 5 mph anyhow. hope this helps post datalogs.
stikerguy
Posts: 40
Joined: Tue Aug 05, 2008 8:11 pm

Re: two step problems PLZ HELP!!!!!

Post by stikerguy »

try this
Attachments
Alfonzo%20b18%20Turbo%206%20lbs%20stock.skl
(35.05 KiB) Downloaded 60 times
Progress
Posts: 89
Joined: Thu Jul 07, 2011 1:05 am
Location: NYC tuning avalable 3479895028

Re: two step problems PLZ HELP!!!!!

Post by Progress »

Change your spurk plugs get ngk 7 or 8 heat range
tuning upon request
347-989-5028
9.23@167 B18C street/track tuned
HP unknown
Post Reply