two step problems PLZ HELP!!!!!
-
- Posts: 3
- Joined: Thu Aug 04, 2011 1:11 pm
two step problems PLZ HELP!!!!!
hey everyone, so yesturday i was boosting on the highway when all of a sudden my car didint let me go passed 5500 rpm and thats what i have my two step set at and its wierd because mi two step only turnes on when im at a dead stop. but today on my way to work it was working fine and just before i got home i started again......sooooo can someone plz help me out
Re: two step problems PLZ HELP!!!!!
Post calibration and datalog of the problem
Do you have the protection setup?
Do you have the protection setup?
-
- Posts: 3
- Joined: Thu Aug 04, 2011 1:11 pm
Re: two step problems PLZ HELP!!!!!
The only protection setup I have is cold start so it wont let me boost when the car temp is cool
-
- Posts: 35
- Joined: Wed Oct 08, 2008 12:55 pm
Re: two step problems PLZ HELP!!!!!
check your VSS
-
- Posts: 3
- Joined: Thu Aug 04, 2011 1:11 pm
Re: two step problems PLZ HELP!!!!!
mi current configuration
- Attachments
-
- Alfonzo b18 Turbo 6 lbs stock.skl
- mi current configuration
- (32.74 KiB) Downloaded 141 times
-
- Posts: 52
- Joined: Tue Jul 26, 2011 7:00 am
Re: two step problems PLZ HELP!!!!!
this ^^^jiggacivic wrote:check your VSS
-
- Posts: 52
- Joined: Tue Jul 26, 2011 7:00 am
Re: two step problems PLZ HELP!!!!!
also after reviewing your parameters ti looks like you have your 2 step set at 4500 not 5500 likeyou said you were having the problem so I would try and get a datalog of the issue and also increase the mph on the 2 step to 6 mph cause vss doesnt really start to read correctly untill after 3 to 5 mph anyhow. hope this helps post datalogs.
Re: two step problems PLZ HELP!!!!!
try this
- Attachments
-
- Alfonzo%20b18%20Turbo%206%20lbs%20stock.skl
- (35.05 KiB) Downloaded 134 times
Re: two step problems PLZ HELP!!!!!
Change your spurk plugs get ngk 7 or 8 heat range
tuning upon request
347-989-5028
9.23@167 B18C street/track tuned
HP unknown
347-989-5028
9.23@167 B18C street/track tuned
HP unknown