SManager V2-1-1

s300 and SManager software questions & answers
User avatar
Hondata
Site Admin
Posts: 9625
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

SManager V2-1-1

Post by Hondata »

Speed Limiter
Useful for people who must stay under 135 or 150mph at the drag strip.

Quickspool
Holds the wastegate shut until just below the target boost to spool the turbo quicker.

Test Upload
For dealers installing S300 V2, so they can test the upload / datalogging without needing to register the S300.

V2.1.0 Changes
  • Added speed limiter.
  • Added a quick spool table to the boost control parameters.
  • Added a test upload function under Online->Test Upload for performing a test upload in newly installed S300 v2's without having to register them.
  • Changed Check For Updates to show current version number and release dates for both beta and production releases.
V2.1.1 Changes
  • Fixed Conversion exception when checking for updates with non-English language settings
Hondata
FreshDA9
Posts: 252
Joined: Sun Jul 27, 2008 8:40 pm

Re: SManager V2-1-0 (beta)

Post by FreshDA9 »

is the quick spool table in duty cycle or psi?
EFI-101 & Advanced Certified*
FreshDA9
Posts: 252
Joined: Sun Jul 27, 2008 8:40 pm

Re: SManager V2-1-0 (beta)

Post by FreshDA9 »

O sorry it says pressure
EFI-101 & Advanced Certified*
Johnny_9
Posts: 312
Joined: Sun Apr 09, 2006 5:12 am

Re: SManager V2-1-0 (beta)

Post by Johnny_9 »

great to see an update on s300; hope to see more feature requests soon.
FreshDA9
Posts: 252
Joined: Sun Jul 27, 2008 8:40 pm

Re: SManager V2-1-0 (beta)

Post by FreshDA9 »

Johnny_9 wrote:great to see an update on s300; hope to see more feature requests soon.
X2

Still hoping for serial logging support for widebands! would like to retire my obd-1 harness and use my lm2's usb.

Plus other request in the request page!
EFI-101 & Advanced Certified*
User avatar
Hondata
Site Admin
Posts: 9625
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: SManager V2-1-0 (beta)

Post by Hondata »

Wideband serial datalogging is supported if you have a s300 v2.
Hondata
FreshDA9
Posts: 252
Joined: Sun Jul 27, 2008 8:40 pm

Re: SManager V2-1-0 (beta)

Post by FreshDA9 »

ahh i didnt see it under the digital tab. i take it S300 v1 hardware cant support this?
EFI-101 & Advanced Certified*
User avatar
Spunkster
Site Admin
Posts: 19570
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: SManager V2-1-0 (beta)

Post by Spunkster »

correct.
jiggacivic
Posts: 35
Joined: Wed Oct 08, 2008 12:55 pm

Re: SManager V2-1-0 (beta)

Post by jiggacivic »

tried out this version today and it does not pulse the boost solenoid it just keeps open and PWM says 99% reverted to version 2.0 and it worked as it should.
User avatar
Hondata
Site Admin
Posts: 9625
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: SManager V2-1-0 (beta)

Post by Hondata »

Check your quick spool boost table - it probably has pressures higher than your normal boost.
Hondata
jiggacivic
Posts: 35
Joined: Wed Oct 08, 2008 12:55 pm

Re: SManager V2-1-0 (beta)

Post by jiggacivic »

in the car sitting and did change quick spool to 0 kpa but solenoid just clicked no pulse.
User avatar
Spunkster
Site Admin
Posts: 19570
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: SManager V2-1-0 (beta)

Post by Spunkster »

What do you have the activation pressure set to?
jiggacivic
Posts: 35
Joined: Wed Oct 08, 2008 12:55 pm

Re: SManager V2-1-0 (beta)

Post by jiggacivic »

activation is 0 kpa here is a copy of the skl
Test.skl
(37.67 KiB) Downloaded 115 times
User avatar
Spunkster
Site Admin
Posts: 19570
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: SManager V2-1-0 (beta)

Post by Spunkster »

It should not activate under vacuum. If you are using kPa, then set the activation pressure to 108kPa. Then set the Quick spool presure to 120kPa.
nayr_one
Posts: 35
Joined: Mon Mar 31, 2008 8:49 pm
Location: greeley co

Re: SManager V2-1-0 (beta)

Post by nayr_one »

whats all this traction control stuff in the sensor setup window is this functional yet or just in here till you get the actual version 2.1.0 done?
Post Reply