s300v3 issues with on-board datalog

s300 and SManager software questions & answers
EH3-R
Posts: 18
Joined: Sat Dec 06, 2008 1:43 pm

s300v3 issues with on-board datalog

Post by EH3-R »

Issue: Invalid data on on-board datalog files.

Issues began to arise after on-board datalogging was triggered via switched input (service connector) WHILE on bluetooth datalog via Android app. Analog input data is invalid on datalogs from on-board, however when recorded on SManager data is valid. There is also an instance when the all data was invalid (i.e. +300mph).

Tried: Two different laptop's and two ecu's

See attached datalogs and calibration.
Attachments
510 test from on board2 invalid data.s3d
all data invalid on-board datalog
(1.82 MiB) Downloaded 88 times
2014-test.skl
calibration
(46.12 KiB) Downloaded 91 times
59 test from smanager.s3d
smanager datalog
(354.41 KiB) Downloaded 93 times
59 test from on board.s3d
on-board datalog
(827.89 KiB) Downloaded 92 times
EH3-R
Posts: 18
Joined: Sat Dec 06, 2008 1:43 pm

Re: s300v3 issues with on-board datalog

Post by EH3-R »

- serial number 30298
- version of software 2.3.2.0
EH3-R
Posts: 18
Joined: Sat Dec 06, 2008 1:43 pm

Re: s300v3 issues with on-board datalog

Post by EH3-R »

Followed directions to create new calibration per Javier, and emailed him my new calibration and datalogs....no response. Still having same on-board datalogging issues. Need help as my on-board datalogging feature is not functional.
User avatar
Spunkster
Site Admin
Posts: 19346
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: s300v3 issues with on-board datalog

Post by Spunkster »

Your software is not up to date. Download the current version from the downloads section of the website and retest.
EH3-R
Posts: 18
Joined: Sat Dec 06, 2008 1:43 pm

Re: s300v3 issues with on-board datalog

Post by EH3-R »

Attached calibration and datalog files were pull from SM ver. 2.4.4.0, s300v3 serial number 30298.

Per instruction from Javier and results:
Erased computer, created a new calibration and uploaded to s300, datalogged from SM and on-board to show the issues I'm having. SM datalog checks out fine with all sensors reading correctly however on-board datalog still has false reads on the auxiliary inputs (AN1-7) from what I see. See attachments.
Attachments
datalog 7 smanager.s3d
(174.03 KiB) Downloaded 87 times
datalog 6 on board.s3d
(172.27 KiB) Downloaded 94 times
NEW_to_fix_datalog.skl
(41.89 KiB) Downloaded 84 times
User avatar
Hondata
Site Admin
Posts: 9475
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: s300v3 issues with on-board datalog

Post by Hondata »

The analog inputs display correctly here (AN1 & 2 pressure, AN3-7 temperature).
Hondata
EH3-R
Posts: 18
Joined: Sat Dec 06, 2008 1:43 pm

Re: s300v3 issues with on-board datalog

Post by EH3-R »

Please look at the attached screen captures of both on board and smanager displays, i.e. Oil Pressure (AN1).

Smanager will datalog both real time and record all sensors+analog inputs correctly (validated reads of temperatures by letting the car warm up and pressures by bliping throttle).

ON BOARD datalog will not record analog inputs correctly (values all erratic, or fixed). Case in point, oil pressure shows 2.4psi....not correct at all. Clearly the on board datalogging function/files are erroneous.

Do I have a faulty s300v3?
Attachments
Capture-smanager datalog.PNG
Capture-smanager datalog.PNG (38.24 KiB) Viewed 4900 times
Capture-on board datalog.PNG
Capture-on board datalog.PNG (39 KiB) Viewed 4900 times
User avatar
Hondata
Site Admin
Posts: 9475
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: s300v3 issues with on-board datalog

Post by Hondata »

Ok, thanks for the additional information. We believe we have identified a problem, related to whether the USB is plugged in or not when the vehicle is switched on and the analog inputs. It probably is the cause of the problem you're seeing (it is not your S300).
We'll make up a new software release for testing shortly.
Hondata
User avatar
Hondata
Site Admin
Posts: 9475
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: s300v3 issues with on-board datalog

Post by Hondata »

Software has been release (V2.5.0)
https://www.hondata.com/software
Hondata
EH3-R
Posts: 18
Joined: Sat Dec 06, 2008 1:43 pm

Re: s300v3 issues with on-board datalog

Post by EH3-R »

Great, hope this resolves the issue.
EH3-R
Posts: 18
Joined: Sat Dec 06, 2008 1:43 pm

Re: s300v3 issues with on-board datalog

Post by EH3-R »

Smanager 2.5.0.0 did NOT resolve the on-board datalogging issue.
Attachments
Capture-smanager datalog 2.5.0.0.PNG
Capture-smanager datalog 2.5.0.0.PNG (37.02 KiB) Viewed 4802 times
Capture-on board datalog 2.5.0.0.PNG
Capture-on board datalog 2.5.0.0.PNG (36.54 KiB) Viewed 4802 times
NEW_to_fix_datalog.skl
(41.89 KiB) Downloaded 95 times
datalog 11 on board.s3d
(46.29 KiB) Downloaded 70 times
datalog 10 smanager.s3d
(264.85 KiB) Downloaded 87 times
User avatar
Hondata
Site Admin
Posts: 9475
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: s300v3 issues with on-board datalog

Post by Hondata »

Your calibration works here. Did you upload to the ECU with 2.5.0 and delete the datalogs?
Hondata
EH3-R
Posts: 18
Joined: Sat Dec 06, 2008 1:43 pm

Re: s300v3 issues with on-board datalog

Post by EH3-R »

Erased ecu, uploaded calibration, datalog. All on 2.5.0.0. Thoughts?
AREA876
Posts: 420
Joined: Tue Jun 15, 2010 6:14 am
Location: Jamaica

Re: s300v3 issues with on-board datalog

Post by AREA876 »

Did it fix the problem?
EH3-R
Posts: 18
Joined: Sat Dec 06, 2008 1:43 pm

Re: s300v3 issues with on-board datalog

Post by EH3-R »

No it didn't, on board datalog doesn't work.
Post Reply