S300 wideband little question

s300 and SManager software questions & answers
Post Reply
ferlandez
Posts: 7
Joined: Fri Nov 09, 2012 10:55 am

S300 wideband little question

Post by ferlandez »

Hi, i got a hondata s300 rev 2. i got it installed on a p28. I want to tune my A/F on my B16A.

I'm from kpro world i already tune A/F etc etc on some RSX. but now my question is:

i have a rsx 02-04 ntk primary O2 sensor part 24665. i would like to know if i can use them to tune my B16A and completly remove the stock narrowband sensor from my civic and use the closed loop option on the S300.


Thanks a lot for your help and sorry about my bad english.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: S300 wideband little question

Post by Hondata »

The OBDI ECU does not have a wideband controller. The RSX ECU (except PRA) does. The OBDI ECU cannot control a wideband o2 sensor - you need an external controller, like the PLX. http://www.plxdevices.com/product_info. ... EMOSMAFRV2
Hondata
ferlandez
Posts: 7
Joined: Fri Nov 09, 2012 10:55 am

Re: S300 wideband little question

Post by ferlandez »

So with that controller i will can completely remove the stock narrowband sensor ?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: S300 wideband little question

Post by Hondata »

Yes, you can run in closed loop using the PLX voltage output.
Hondata
Post Reply