s300v3 Issues

s300 and SManager software questions & answers
Post Reply
DatLife84
Posts: 25
Joined: Tue Feb 25, 2014 6:18 pm

s300v3 Issues

Post by DatLife84 »

Hi new to the s300. My friend installed the chip in the ECU himself and when I tried to upload a calibration seemed like nothing happened and once I select the tap to datalogg with the lightening bolt nothing is reading on the sensors in the display. Looks like there is a problem with the ECU communicating with the laptop. Could he have damaged anything installing the chip?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: s300v3 Issues

Post by Spunkster »

Has J12 been cut in the ECU?
DatLife84
Posts: 25
Joined: Tue Feb 25, 2014 6:18 pm

Re: s300v3 Issues

Post by DatLife84 »

There is nothing in that location.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: s300v3 Issues

Post by Spunkster »

Post high resolution in focus pictures of the inside of the ECU where it has been socketed from the top and bottom of the ECU.
DatLife84
Posts: 25
Joined: Tue Feb 25, 2014 6:18 pm

Re: s300v3 Issues

Post by DatLife84 »

Thanks for your help but my friend is buying a hondata ready ecu. Im pretty sure he broke his old one, good thing he as a spare p28. Thanks again.
Post Reply