S300 repairable?

s300 and SManager software questions & answers
Post Reply
wiggum80
Posts: 20
Joined: Tue Oct 13, 2009 7:15 am
Location: Toronto CANADA

S300 repairable?

Post by wiggum80 » Wed Oct 29, 2014 6:22 am

Car was recently pulled from storage, fuel pump won't prime and solid CEL. A different ECU/s300 and the car runs perfect. Faulty Hondata s300 ser# 12194. ECU tests ok on a moates Engine simulator, ECU is a 37820-P06-A01. When uploading the s300 on the moates engine simulator you can upload and datalog only once but with no fuel pump output. When you shut off datalog you can't re-upload or restart datalogging. Is there a repair service through hondata available? Thank you

User avatar
Spunkster
Site Admin
Posts: 18012
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: S300 repairable?

Post by Spunkster » Wed Oct 29, 2014 2:07 pm

Send an email to support <at> hondata.com with the following and I will issue an RMA and give you further
instructions (include a link to this thread):

Name:
Address:
Phone:
Email:
Serial#:
Description of problem:

wiggum80
Posts: 20
Joined: Tue Oct 13, 2009 7:15 am
Location: Toronto CANADA

Re: S300 repairable?

Post by wiggum80 » Thu Oct 30, 2014 7:10 am

Email sent, thank you.

Post Reply