Bring back the strain gauge

s300 and SManager software questions & answers
rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Bring back the strain gauge

Post by rev hard » Sat Dec 26, 2015 8:06 am

Ive noticed that a lot of people are going faster and faster on s300 now then before, is there anyway way we can bring back the strain gauge settings in s300 to maybe even further improve times , with the people running the dog boxes?

SPOOLIN
Posts: 143
Joined: Sun Mar 20, 2005 10:47 pm
Location: North Georgia
Contact:

Re: Bring back the strain gauge

Post by SPOOLIN » Sat Jan 23, 2016 11:49 am

perhaps it was taken out because the factory ecu can't process it fast enough?
www.MSSRACING.com
9.29 | 6.20 | 167

rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: Bring back the strain gauge

Post by rev hard » Thu May 12, 2016 6:41 pm

could a strain gauge with 2.5v be setup using the iat input? to cut ignition? on shifts

User avatar
Hondata
Site Admin
Posts: 8774
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Bring back the strain gauge

Post by Hondata » Fri May 13, 2016 5:44 am

It was taken out because there is very limited space in the ECU memory. Since more people are interested in using a strain gauge input we've added back in a timed rev limit for the shift cut.
Hondata

SPOOLIN
Posts: 143
Joined: Sun Mar 20, 2005 10:47 pm
Location: North Georgia
Contact:

Re: Bring back the strain gauge

Post by SPOOLIN » Fri May 13, 2016 9:43 am

How does that help vs adding back in the strain cut input?
Last edited by SPOOLIN on Fri May 13, 2016 6:31 pm, edited 1 time in total.
www.MSSRACING.com
9.29 | 6.20 | 167

rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: Bring back the strain gauge

Post by rev hard » Fri May 13, 2016 5:14 pm

yea how does this help? and how long does it cut for?

User avatar
Hondata
Site Admin
Posts: 8774
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Bring back the strain gauge

Post by Hondata » Sat May 14, 2016 5:31 am

It is a strain gauge input.
straingauge.png
straingauge.png (11.6 KiB) Viewed 7767 times
Hondata

SPOOLIN
Posts: 143
Joined: Sun Mar 20, 2005 10:47 pm
Location: North Georgia
Contact:

Re: Bring back the strain gauge

Post by SPOOLIN » Sat May 14, 2016 6:20 am

I don't see that in 2.5.3?
www.MSSRACING.com
9.29 | 6.20 | 167

rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: Bring back the strain gauge

Post by rev hard » Sat May 14, 2016 9:57 am

this would be great...what voltage does it work on? or need to trigger it? 12v? 5 v? 2.5v?

User avatar
Hondata
Site Admin
Posts: 8774
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Bring back the strain gauge

Post by Hondata » Mon May 16, 2016 7:51 am

It has not been released yet. It functions from an off/on input, not voltage.
Hondata

rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: Bring back the strain gauge

Post by rev hard » Wed Jun 15, 2016 6:25 pm

using this cut...how does the timing come back in?..does it slowly come in or does it just go back to the map instantly?

V-Spec race development
Posts: 192
Joined: Wed Aug 22, 2007 12:41 am

Re: Bring back the strain gauge

Post by V-Spec race development » Fri Jun 17, 2016 9:05 pm

What strain gauge brand do u guys recommend? I know it needs to be a digital ones and not voltage activated thanks.

rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: Bring back the strain gauge

Post by rev hard » Sun Jun 19, 2016 12:28 pm

Flat shift strain gauge shift knob...has a built in on/off ground signal that is adj for how touchy the trigger is

V-Spec race development
Posts: 192
Joined: Wed Aug 22, 2007 12:41 am

Re: Bring back the strain gauge

Post by V-Spec race development » Sun Jun 19, 2016 9:46 pm

rev hard wrote:Flat shift strain gauge shift knob...has a built in on/off ground signal that is adj for how touchy the trigger is
I see that they are based in Europe, Are there any dealers in the U.S?

rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: Bring back the strain gauge

Post by rev hard » Mon Jun 20, 2016 12:15 pm

yup....speedfactory sells them...jjautowerks...few others

Post Reply