pwm dont show on datalog

s300 and SManager software questions & answers
Post Reply
rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

pwm dont show on datalog

Post by rev hard »

ive recently downloaded 2.6.1 and was looking at some logs from last weekend and noticed the pwm is always 0% ? also shows 0 in the sensor list...is this a bug with the new version?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: pwm dont show on datalog

Post by Spunkster »

Can you post your calibration and datalog showing this?
rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: pwm dont show on datalog

Post by rev hard »

chi7.s3d
(165.64 KiB) Downloaded 174 times
rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: pwm dont show on datalog

Post by rev hard »

theres a log....it always shows 0...and it should be anyweres from 50-63%
rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: pwm dont show on datalog

Post by rev hard »

shows pwm in the same log fine when opend up with 2.5.6
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: pwm dont show on datalog

Post by Spunkster »

Please download version 2.6.2 and upload your calibration to the ECU and see if that resolves the issue.
rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: pwm dont show on datalog

Post by rev hard »

same issue with 2.6.2
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: pwm dont show on datalog

Post by Spunkster »

have you made a new datalog using the version 2.6.2
rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: pwm dont show on datalog

Post by rev hard »

no I have not...would that fix the issue?..any log made from now on will show the pwm in the log?
rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: pwm dont show on datalog

Post by rev hard »

The pwn does show in the new log that I took..so it is working properly now ..just old logs won't show the pwm
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: pwm dont show on datalog

Post by Hondata »

Thanks for the report - we have fixed this and will make a new release.
Hondata
Post Reply