Page 1 of 1

S300 P0130 Error Closed Loop Help!!!

Posted: Fri Sep 21, 2018 8:06 am
by Do1313R
Hey guys,
Long time lurker first time posting…
I’m running Hondata S300 and I’ve been randomly getting a P0130 Error code when driving. It started every few days and now it seems to be happening every time I drive the car.

I don’t have the 02 hooked up.

-The chassis is a 2000 Civic DX with a 97/2001 B18C5 Swap.
-The engine harness is the stock DX with the needed modifications for VTEC/ IACV.
-ECU is a P06.

I uploaded photos of the Closed Loop settings along with a screen shot of the error code via the
Hondata app.

I’d appreciate any help and Let me know if I’m for getting any info needed.


Image

Image

Image

Re: S300 P0130 Error Closed Loop Help!!!

Posted: Fri Sep 21, 2018 9:48 am
by Spunkster
Please post your calibraion

Re: S300 P0130 Error Closed Loop Help!!!

Posted: Fri Sep 21, 2018 10:13 am
by Do1313R
Spunkster wrote: Fri Sep 21, 2018 9:48 am Please post your calibraion
I can upload that tonight, im at work.

Re: S300 P0130 Error Closed Loop Help!!!

Posted: Sun Sep 23, 2018 10:45 am
by portenio78
In for the results. Been having the same issue lately after a year of no problems at all.

Re: S300 P0130 Error Closed Loop Help!!!

Posted: Mon Sep 24, 2018 5:13 pm
by Do1313R
Spunkster wrote: Fri Sep 21, 2018 9:48 am Please post your calibraion
Here it is
c5 tune.skl
(46.46 KiB) Downloaded 184 times

Re: S300 P0130 Error Closed Loop Help!!!

Posted: Tue Sep 25, 2018 9:43 am
by TTR
If you don't have an O2 sensor then it should be set to open loop. In the screen shot and in the tune closed loop stock sensor is enabled.

Re: S300 P0130 Error Closed Loop Help!!!

Posted: Wed Oct 03, 2018 7:51 am
by Do1313R
Hey thanks for the reply.
I changed the setting about 50 miles ago, no CEL yet.