Please help load and fuel pressure drop to 0

s300 and SManager software questions & answers
Post Reply
GangarTypeR
Posts: 6
Joined: Mon Jul 01, 2019 11:41 am

Please help load and fuel pressure drop to 0

Post by GangarTypeR »

So attached is the graph of what's going on. I believe an injector is not dead timed right (Cheap injectors no flow chart) and its opening or closing at the wrong time and the ecu is trying to adjust the timing thus why its dropping right after. but basically the car sputters out and comes back its pretty much consistent. thanks for any help new to this level of building and tuning
Attachments
IMG_0354.jpg
IMG_0354.jpg (610.29 KiB) Viewed 909 times

User avatar
Spunkster
Site Admin
Posts: 18304
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Please help load and fuel pressure drop to 0

Post by Spunkster »

Without the calibration and the actual Datalog showing the issue it is hard to guess what it might be. A screenshot is not enough.

GangarTypeR
Posts: 6
Joined: Mon Jul 01, 2019 11:41 am

Re: Please help load and fuel pressure drop to 0

Post by GangarTypeR »

I can give you the calibration but as for a data log you just want this same chart but the video?

User avatar
Spunkster
Site Admin
Posts: 18304
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Please help load and fuel pressure drop to 0

Post by Spunkster »

I don't want any videos, I just need the recorded Datalog of the issue.

GangarTypeR
Posts: 6
Joined: Mon Jul 01, 2019 11:41 am

Re: Please help load and fuel pressure drop to 0

Post by GangarTypeR »

so I don't know whats up doesn't seem to be dropping to 0 anymore but i'm so confused got two data logs only difference was getting the tps set correctly on them and also the config here. thanks for any help
Attachments
test drive 2.s3d
(4.41 MiB) Downloaded 24 times
test drive 1.s3d
(3.94 MiB) Downloaded 25 times
GSR with 440CC cammed (1).skl
(43.47 KiB) Downloaded 29 times

User avatar
Spunkster
Site Admin
Posts: 18304
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Please help load and fuel pressure drop to 0

Post by Spunkster »

What time stamp in the datalog were you experiencing the issue?

Post Reply