Pit Speed Limiter

s300 and SManager software questions & answers
Post Reply
EGAJohn
Posts: 3
Joined: Mon Jul 08, 2019 8:06 pm

Pit Speed Limiter

Post by EGAJohn » Mon Jul 08, 2019 8:13 pm

Is there any possibility I could set a speed limiter to approx. 37mph to activate with a button for when I enter the pits? Same idea as launch control but just a speed limiter.

User avatar
Spunkster
Site Admin
Posts: 17862
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Pit Speed Limiter

Post by Spunkster » Tue Jul 09, 2019 9:08 am

You could try to use the nitrous/Aux parameters to remove all fuel at a specified speed. It was not designed for this, but may do what you want.

EGAJohn
Posts: 3
Joined: Mon Jul 08, 2019 8:06 pm

Re: Pit Speed Limiter

Post by EGAJohn » Tue Jul 09, 2019 12:35 pm

Very true I never thought of that! Ill give it a shot and see how it comes out.

EGAJohn
Posts: 3
Joined: Mon Jul 08, 2019 8:06 pm

Re: Pit Speed Limiter

Post by EGAJohn » Thu Aug 01, 2019 8:04 am

To follow up on this I ended up trying the burnout limiter which I believe utilizes the main rev limiter. I found what rpm puts me at 37mph and set it to that on my pit button. Seems to be working good. I'm not sure how safe it is to hold for long periods of time while pitting but we will see if I experience any problems in the future. If anyone has any information on any possible effects, please post them. I'm still looking into possibly playing around with the aux parameters in the future if that happens to be the better option. But for now, burnout limiter will do.

Post Reply