S300 power to led lights
-
- Posts: 25
- Joined: Tue Jul 28, 2020 10:20 am
Re: S300 power to led lights
J12 has nothing there
Re: S300 power to led lights
Have you tried your s300/ecu in a known working ECU/vehicle?
-
- Posts: 25
- Joined: Tue Jul 28, 2020 10:20 am
Re: S300 power to led lights
I unfortunately don’t know of anyone that has a car for me to check with is ther anything I can do to check it
-
- Posts: 25
- Joined: Tue Jul 28, 2020 10:20 am
Re: S300 power to led lights
I swapped the entire main harness for one with no splices I can connect to the Bluetooth but it’s saying my ignition is off and I still can’t upload or view in real time
Re: S300 power to led lights
Did the person that did the work on the ECU test it to make sure it was working?
-
- Posts: 25
- Joined: Tue Jul 28, 2020 10:20 am
Re: S300 power to led lights
They just put the new stuff in the ecu I’ve seen socketed ecu for 230 on eBay idk if it would be best to buy one or just send this one off for repair
Re: S300 power to led lights
Have you verified that the S300 is seated properly on the pins?
We don't repair ECUs, so if the ECU is the problem, You will need to replace it.
We don't repair ECUs, so if the ECU is the problem, You will need to replace it.
-
- Posts: 25
- Joined: Tue Jul 28, 2020 10:20 am
Re: S300 power to led lights
I have taken it out and re seated it could the s300 board itself have an issue I still can’t upload anything or view in real time on the app I can connect with Bluetooth but it says the ignition is off so I can’t do anything else
Re: S300 power to led lights
send an email to support <at> Hondata.com with the following and I will issue an RMA and give you further
instructions:
Name:
Address:
Phone:
Email:
Serial#:
Description of problem:
Include a link to this thread.
instructions:
Name:
Address:
Phone:
Email:
Serial#:
Description of problem:
Include a link to this thread.
-
- Posts: 25
- Joined: Tue Jul 28, 2020 10:20 am
Re: S300 power to led lights
Quick question if the socket tester is showing all green shouldn’t that mean the s300 should post up I emailed support they told me to put new capictors because it was showing the ecu wasn’t powering up but I’m on my 3rd ecu now
Re: S300 power to led lights
You need to ask this via email if you are in contact that way.