Base maps for D16y8 Boosted anyone ??

JDMCRX · Post by **JDMCRX** » Mon Aug 15, 2005 9:17 am

Hye guys

I got my S300 and im wondering if anyone has any basemaps they can help me with so i can at least move the car around

99 civic d16y8 turbo

flip1199 · Post by **flip1199** » Mon Aug 15, 2005 1:43 pm

have u opened up anyof the files in "calibrations"? the have base maps for just about all ecu's.

JDMCRX · Post by **JDMCRX** » Mon Aug 15, 2005 3:48 pm

Well i was thinking of getting the P28 and just adding the boost tables and go from there would that work??

Killa-X · Post by **Killa-X** » Thu Aug 25, 2005 7:29 am

how do you extend the rpm table? I saw on the greddy file it goes to 11,000, however, I can't do this with the p28 file.

Post by **Hondata** » Thu Aug 25, 2005 8:53 am

To extend the rpm right click on the rpm values in the tables. Start at the bottom (highest rpm) and work backwards. Read the help file for more information because there are issues to consider for calibrations which are already tuned to the vehicle.

Killa-X · Post by **Killa-X** » Fri Aug 26, 2005 8:46 pm

How can one access the help file? When I was in the s300 smanager program and clicked on help and then contents, nothing happened.???

Post by **Hondata** » Sat Aug 27, 2005 9:16 am

Upgrade to the latest version.

sohc_mshue · Post by **sohc_mshue** » Sat Aug 27, 2005 2:22 pm

remember you have to be very careful with the timing on boosted y8's. They require much less timing than the normal p28 maps have. I don't believe there is a calibration for a y8 yet. People were able to import in the p2p maps though and its crazy how much less timing those maps have than p28 maps.

Killa-X · Post by **Killa-X** » Sat Aug 27, 2005 3:59 pm

Hondata wrote:Upgrade to the latest version.

Where does one find the newest version? Because the newest version on the hondata.com website is still version 1.03

What is the latest version now?

Post by **Hondata** » Sat Aug 27, 2005 5:33 pm

The version on http://www.hondata.com/smanager.html is 1.0.9 Where was 1.0.3?

daveG · Post by **daveG** » Tue Feb 21, 2006 8:11 pm

Kind of bringing this back up from the dead, but I didn't see a purpose in starting a new thread. As was stated by sohc_mshue, the D16Y8s have I think about 4? less timing to start off with just for base timing. Does anybody have a good basemap with similar timing values? I'm going to be tuning the car on a dyno hopefully in the near future, but I need a map to get there on.