Page 1 of 1

Base maps for D16y8 Boosted anyone ??

Posted: Mon Aug 15, 2005 9:17 am
by JDMCRX
Hye guys

I got my S300 and im wondering if anyone has any basemaps they can help me with so i can at least move the car around

99 civic d16y8 turbo

Posted: Mon Aug 15, 2005 1:43 pm
by flip1199
have u opened up anyof the files in "calibrations"? the have base maps for just about all ecu's.

Posted: Mon Aug 15, 2005 3:48 pm
by JDMCRX
Well i was thinking of getting the P28 and just adding the boost tables and go from there would that work??

Posted: Thu Aug 25, 2005 7:29 am
by Killa-X
how do you extend the rpm table? I saw on the greddy file it goes to 11,000, however, I can't do this with the p28 file.

Posted: Thu Aug 25, 2005 8:53 am
by Hondata
To extend the rpm right click on the rpm values in the tables. Start at the bottom (highest rpm) and work backwards. Read the help file for more information because there are issues to consider for calibrations which are already tuned to the vehicle.

Posted: Fri Aug 26, 2005 8:46 pm
by Killa-X
How can one access the help file? When I was in the s300 smanager program and clicked on help and then contents, nothing happened.???

Posted: Sat Aug 27, 2005 9:16 am
by Hondata
Upgrade to the latest version.

Posted: Sat Aug 27, 2005 2:22 pm
by sohc_mshue
remember you have to be very careful with the timing on boosted y8's. They require much less timing than the normal p28 maps have. I don't believe there is a calibration for a y8 yet. People were able to import in the p2p maps though and its crazy how much less timing those maps have than p28 maps.

Posted: Sat Aug 27, 2005 3:59 pm
by Killa-X
Hondata wrote:Upgrade to the latest version.
Where does one find the newest version? Because the newest version on the hondata.com website is still version 1.03

What is the latest version now?

Posted: Sat Aug 27, 2005 5:33 pm
by Hondata
The version on http://www.hondata.com/smanager.html is 1.0.9 Where was 1.0.3?

Posted: Tue Feb 21, 2006 8:11 pm
by daveG
Kind of bringing this back up from the dead, but I didn't see a purpose in starting a new thread. As was stated by sohc_mshue, the D16Y8s have I think about 4? less timing to start off with just for base timing. Does anybody have a good basemap with similar timing values? I'm going to be tuning the car on a dyno hopefully in the near future, but I need a map to get there on.