SManager V1-1 Beta
SManager V1-1 Beta
The main change is the addition of another table overlay (like lambda overlay) and many more conditions to filter out unwanted overlay values.
V1.1.0.0
? Added adjustable voltage offset for the wideband lambda conversion.
? Added additional MAP sensor details
? Added additional sensor overlay features
? Added fuel overrun cutoff rpm
? Added increase / decrease current cell
Also a fuel problem with non-OEM MAP sensors and a high idle was fixed.
Update 10/10/2005:
? Added additional tables for water temp correction.
Download here
V1.1.0.0
? Added adjustable voltage offset for the wideband lambda conversion.
? Added additional MAP sensor details
? Added additional sensor overlay features
? Added fuel overrun cutoff rpm
? Added increase / decrease current cell
Also a fuel problem with non-OEM MAP sensors and a high idle was fixed.
Update 10/10/2005:
? Added additional tables for water temp correction.
Download here
Last edited by Hondata on Wed Nov 09, 2005 10:08 am, edited 2 times in total.
Hondata
-
- Posts: 127
- Joined: Wed May 21, 2003 12:03 am
-
- Posts: 23
- Joined: Sat Sep 10, 2005 8:57 pm
-
- Posts: 127
- Joined: Wed May 21, 2003 12:03 am
It does actually record for me, but it does not do the real time cell by cell lambda overlay. I know Hondata is aware of the issue, i called them after the release of the beta and testing by us.
I'm sure the fix will be up soon. The real time Lambda readings are fine, just the lambda trace feature is not working. Try making a datalog (recording) then playing it back
I'm sure the fix will be up soon. The real time Lambda readings are fine, just the lambda trace feature is not working. Try making a datalog (recording) then playing it back
-
- Posts: 127
- Joined: Wed May 21, 2003 12:03 am
-
- Posts: 127
- Joined: Wed May 21, 2003 12:03 am
Sorry, forgot the important details:
1. FJO wideband (NTK Sensor)
2. Wired through the O2 input
Readings will display in the "display", but will not log realtime into the lambda trace.
I made a recording briefly, I will post it and you can see during the playback the lambda values are in the overlay. But during the logging of the vehicle the car did not display these values in the fields.
When i open up the Smanager:
I select reopen
pick the .skl,
hit f10 to log
It will log lambda in the "display"
When i go to the sensor overlay i have setup, the duty cycle (my selection), works fine.
This is working on the previous version and does work if i unstall the old version. When I use the Beta, it works to fix the cold idle and the non-OEM map sensors. The Beta just doesnt log the lambda overlay.
Hopefully this is enough information. Attached will be the short log.
1. FJO wideband (NTK Sensor)
2. Wired through the O2 input
Readings will display in the "display", but will not log realtime into the lambda trace.
I made a recording briefly, I will post it and you can see during the playback the lambda values are in the overlay. But during the logging of the vehicle the car did not display these values in the fields.
When i open up the Smanager:
I select reopen
pick the .skl,
hit f10 to log
It will log lambda in the "display"
When i go to the sensor overlay i have setup, the duty cycle (my selection), works fine.
This is working on the previous version and does work if i unstall the old version. When I use the Beta, it works to fix the cold idle and the non-OEM map sensors. The Beta just doesnt log the lambda overlay.
Hopefully this is enough information. Attached will be the short log.
- Attachments
-
- testrun2.s2d
- (1.11 MiB) Downloaded 175 times