Injector Size Field

s300 and SManager software questions & answers
Locked
mkulak
Posts: 60
Joined: Fri Oct 21, 2005 8:38 am
Location: Richmond Hill, ON

Injector Size Field

Post by mkulak » Fri Oct 21, 2005 9:20 am

Hi,

When I change the CURRENT INJECTOR SIZE field, does it change the fueling to the computer to compensate? I know stock is 240cc, but my question is that if I load the stock ITR map, and then install 440cc injectors, do I need to re-tune all the tables, or just update the CURRENT INJECTOR SIZE field to 440cc and do some minor fine tuning.

Thanks, Marc

User avatar
Hondata
Site Admin
Posts: 8771
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Fri Oct 21, 2005 11:43 am

Changing the current injector size changes the fuel for the whole ECU - fuel tables, throttle tip in, closed loop operation etc.

In your case setting the current injector size to 440cc will do most of the work but it is still recommended to further tune using a wideband.
Hondata

mkulak
Posts: 60
Joined: Fri Oct 21, 2005 8:38 am
Location: Richmond Hill, ON

Post by mkulak » Fri Oct 21, 2005 12:43 pm

Perfect.. Sound easy enough..

Can the system handle a change from 240cc to 1000cc assuming I start with the B16a Greddy File? Or is that too much of a jump?

I'm working with 2 different cars, one All-Motor and one Turbo.

Thanks, Marc

User avatar
Hondata
Site Admin
Posts: 8771
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Fri Oct 21, 2005 3:43 pm

240cc to 1000cc will work, but expect to do some retuning as it is a big jump. Consider running smaller injectors if possible as generally the smaller injectors will run better, especially for the street.
Hondata

mkulak
Posts: 60
Joined: Fri Oct 21, 2005 8:38 am
Location: Richmond Hill, ON

Post by mkulak » Fri Oct 21, 2005 4:00 pm

Car is going to be full-race hoping to make 650+ hp. 1000cc injectors are probably required. No big deal on the tuning, just want to make sure the Hondata can handle the big injector.

Thanks for the help....

Silverbeast
Posts: 127
Joined: Wed May 21, 2003 12:03 am

Post by Silverbeast » Mon Oct 24, 2005 11:19 am

Yep, i have ran 1600cc injectors on Hondata and no problems. Wouldnt know they are any bigger than a 310-550 either.

Locked