idle a/f of 12.7 not picked up in est fuel change

s300 and SManager software questions & answers
Locked
ridewhencan
Posts: 61
Joined: Mon Nov 22, 2004 5:44 pm
Location: CT

idle a/f of 12.7 not picked up in est fuel change

Post by ridewhencan »

The target lambda is 14.7. I'm idleing at 850 rpm but lowest datalog lambda reading is at 1000 rpm.
cinq
Posts: 25
Joined: Sat Feb 14, 2004 10:15 am
Location: Philadelphia

Re: idle a/f of 12.7 not picked up in est fuel change

Post by cinq »

ridewhencan wrote:The target lambda is 14.7. I'm idleing at 850 rpm but lowest datalog lambda reading is at 1000 rpm.
Play with IAT and ECT Comp....I noticed that in cold weather...you may be idling at 850...but the the cells will be in column 3..4.5..instead of 2&3.

If you correct the IAT%...set it to lower % at certain temp. It will go back to where you have it when it was warm outside or when you last have a good reading.
kaj
Posts: 98
Joined: Mon Nov 21, 2005 4:47 pm

Post by kaj »

** edit. i need to stop posting while half asleep.
Locked