S300 flashrom memory issue

s300 and SManager software questions & answers
Locked
sleepyhatch
Posts: 9
Joined: Wed Aug 31, 2005 10:34 am
Contact:

S300 flashrom memory issue

Post by sleepyhatch » Sun Dec 18, 2005 10:11 pm

I was trying to datalog with my S300 today and run into some problems. When I open the download from ECU screen, it is showing all the memory is used. But under recordings, its blank with no saved files. And I don't have a way of recoverying the used up memory. Is this a firmware bug? How do I clear up the memory?

I have attached a screen shot of the issue I am describing and also my calibration file. Also note the bogus information presented on the left handside of the screen while I was trying to datalog.
Attachments
Chang_12-18.skl
calibration file
(15.55 KiB) Downloaded 53 times
memoryissue.JPG
screenshot of memory issue
memoryissue.JPG (60.51 KiB) Viewed 982 times

User avatar
Hondata
Site Admin
Posts: 8774
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Mon Dec 19, 2005 11:36 am

Make a small datalog then use 'Delete All' to delete all the datalogs. If you cannot datalog at all, or if 'Delete All' doesn't work, let us know.
Hondata

sleepyhatch
Posts: 9
Joined: Wed Aug 31, 2005 10:34 am
Contact:

Post by sleepyhatch » Wed Dec 21, 2005 9:21 am

thank you. that worked. I created a small datalog file and use the delete all feature and now all memory are free.

Locked