Launch control w/ anti-lag

s300 and SManager software questions & answers
Locked
1320motoring
Posts: 2
Joined: Thu Jan 20, 2005 11:14 am
Contact:

Launch control w/ anti-lag

Post by 1320motoring »

just a question...........has anyone had any success with this feature? If so, what are some of the parameters used to make it work?[/b]

airshifter
Posts: 40
Joined: Wed May 18, 2005 7:05 pm
Contact:

Post by airshifter »

works a little bit on our car now without the msd ignition

but when I used the msd 2-step on top of the s300 antilag our b16 launched with 20psi @ 8500 with a t4/60-1

the M&W ignition doesn't have 2 step, we only get 6psi now

didn't add fuel and pulled 20 degrees of timing out 400 rpm before the msd 2-step activation point and had the s300 2-step 200 rpm past the msd 2step

1320motoring
Posts: 2
Joined: Thu Jan 20, 2005 11:14 am
Contact:

Post by 1320motoring »

so its more an ignition pull over adding fuel also? I read on an efi forum that adding fuel and also pulling ignition was what worked for the person. Only thing is.....he had a different type of engine management.

kaj
Posts: 98
Joined: Mon Nov 21, 2005 4:47 pm

Post by kaj »

i can't get my launch control to work. either it's on..or it isn't. i tried to use my A/C button.. even inverted the input.. still nothing. it's either on or not. period, which makes warming up the tires in the water box impossible :(

kesnut
Posts: 155
Joined: Tue Oct 29, 2002 7:31 am
Location: Trinidad W.I.
Contact:

Post by kesnut »

any update on this?
the guy who are using it, what setting do you have and how did you go about getting the settings?

SpadeMotorsports
Posts: 21
Joined: Fri Sep 16, 2005 12:42 pm

Post by SpadeMotorsports »

I use it and it works too good for me. I hit 24 lbs. of boost within 2 bumps of the launch limiter. I am having a problem with the limiter holding. If I set it for 7022, it will bounce from 7000 to 9500. Not good in terms of trying to control spin.

kesnut
Posts: 155
Joined: Tue Oct 29, 2002 7:31 am
Location: Trinidad W.I.
Contact:

Post by kesnut »

i played with it weekend, but i was not sure if it was really working? as the i made changes to the setting, boost was the same. that is why i was asking, how do you go about setting this up, what signs are you looking for,listening for.

thudreem
Posts: 50
Joined: Fri Nov 21, 2003 5:24 pm
Contact:

Post by thudreem »

SpadeMotorsports wrote:I use it and it works too good for me. I hit 24 lbs. of boost within 2 bumps of the launch limiter. I am having a problem with the limiter holding. If I set it for 7022, it will bounce from 7000 to 9500. Not good in terms of trying to control spin.
Wow, what setting are you using to achieve 24 lbs off the 2 step?

User avatar
Spunkster
Site Admin
Posts: 18801
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

SpadeMotorsports wrote:I use it and it works too good for me. I hit 24 lbs. of boost within 2 bumps of the launch limiter. I am having a problem with the limiter holding. If I set it for 7022, it will bounce from 7000 to 9500. Not good in terms of trying to control spin.
I bet if you look at your datalogs you will find that your wheel spin is casuign the mph to be above the cutoff for the launch control. Try raising the launch speed.

SpadeMotorsports
Posts: 21
Joined: Fri Sep 16, 2005 12:42 pm

Post by SpadeMotorsports »

I bet if you look at your datalogs you will find that your wheel spin is casuign the mph to be above the cutoff for the launch control. Try raising the launch speed.[/quote]

There is no wheelspin, for I am not moving. I am sitting on the line pre-launch.

User avatar
Spunkster
Site Admin
Posts: 18801
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

Can you post datalogs showing this?

siadam
Posts: 9
Joined: Tue Mar 28, 2006 11:46 am
Location: Around.
Contact:

Post by siadam »

The antilag is just a check box plus adjustments of fuel/timing to activate correct?

As for the launch control..is there an external wiring/etc that is involved to have it activated...?

Thanks.
8)
Built, NOT Bought.
Image
^^clicky.for.more.info^^

Locked