Reporting Bug!!

Jordo · Post by **Jordo** » Mon Jan 09, 2006 8:42 pm

When "ON-board Datalogging" is enabled, and set to certain conditions, and you have a laptop pluged in also to datalog.

If you do a pull, the smmanger will freak out.

To fix problem, "disable on-board datalogging"

Post by **Spunkster** » Tue Jan 10, 2006 10:35 am

what version are you referring to?

jdmspecdc5 · Post by **jdmspecdc5** » Tue Jan 10, 2006 3:02 pm

this would explain why sometimes the s300 bugs out and pretty soon im boosting 360psi @ 60,000rpm haha. thanks for the tip. hopefully it gets rid of this problem.

Jordo · Post by **Jordo** » Fri Jan 13, 2006 3:52 pm

jdmspecdc5 wrote:this would explain why sometimes the s300 bugs out and pretty soon im boosting 360psi @ 60,000rpm haha. thanks for the tip. hopefully it gets rid of this problem.

Yes, it will fix the problem is you just disable it.

Spunkster wrote:what version are you referring to?

newest version.

Post by **Spunkster** » Fri Jan 13, 2006 4:28 pm

I cannot report problems without the exact version number found in Help, About.

Also it is best to have onboard datalogging disabled unless you are gogin to be at the track or the laptop is not accesible for datalogging.

Jordo · Post by **Jordo** » Mon Jan 16, 2006 10:40 pm

its version 1.1.0.0 according to the about

Post by **Spunkster** » Tue Jan 17, 2006 10:10 am

Try checking for updates. Version 1.1.1.0 is the most recent version.