Code 23 (knock sensor)

s300 and SManager software questions & answers
Locked
dc2quick
Posts: 13
Joined: Tue Nov 29, 2005 8:16 pm

Code 23 (knock sensor)

Post by dc2quick » Tue Feb 07, 2006 8:58 pm

Just got my p28 back today and hooked everything up. I pulled a cel right off the bat when i started the car. I tried to jump the diagnostic plug with a paper clip and i got a steady cel. However the car idles funny then levels out. on the hondata application on my laptop it reads cel 23 (knock sensor) when i plug in the stock ecu i don't pull any codes... I haven't tried to drive the car i just started it up a few times and let it idle and revved it a few times... what looks to be my problem?

Djbower1
Posts: 52
Joined: Mon Jan 09, 2006 11:30 am

Post by Djbower1 » Tue Feb 07, 2006 9:23 pm

I don't think the P28 ecu has Knock sensor support so you have to disable it with the parameters window.

I'm sure Hondata Support will confirm if I'm right or wrong.

Dan

Djbower1
Posts: 52
Joined: Mon Jan 09, 2006 11:30 am

Post by Djbower1 » Tue Feb 07, 2006 9:25 pm


dc2quick
Posts: 13
Joined: Tue Nov 29, 2005 8:16 pm

Post by dc2quick » Tue Feb 07, 2006 9:32 pm

awesome! that's the same exact problem i've got i will give it a shot... thanks dan

Locked