Page 1 of 1

Code 23 (knock sensor)

Posted: Tue Feb 07, 2006 8:58 pm
by dc2quick
Just got my p28 back today and hooked everything up. I pulled a cel right off the bat when i started the car. I tried to jump the diagnostic plug with a paper clip and i got a steady cel. However the car idles funny then levels out. on the hondata application on my laptop it reads cel 23 (knock sensor) when i plug in the stock ecu i don't pull any codes... I haven't tried to drive the car i just started it up a few times and let it idle and revved it a few times... what looks to be my problem?

Posted: Tue Feb 07, 2006 9:23 pm
by Djbower1
I don't think the P28 ecu has Knock sensor support so you have to disable it with the parameters window.

I'm sure Hondata Support will confirm if I'm right or wrong.

Dan

Posted: Tue Feb 07, 2006 9:25 pm
by Djbower1

Posted: Tue Feb 07, 2006 9:32 pm
by dc2quick
awesome! that's the same exact problem i've got i will give it a shot... thanks dan