IAT Correction above 100 degrees F

s300 and SManager software questions & answers
Locked
daveG
Posts: 16
Joined: Tue Aug 16, 2005 5:43 pm

IAT Correction above 100 degrees F

Post by daveG » Fri Feb 10, 2006 8:59 pm

I'm looking in the S-manage software and the highest IAT temp it appears as if it will correct for are 100 degrees Farenheit. Is it possible to edit anything in the S300 to change for higher IAT values, or is this as high as the stock sensor reads?

Also one other question, when you're on the dyno, can you adjust fuel/timing values quickly while loading the car?

User avatar
Hondata
Site Admin
Posts: 8783
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Sat Feb 11, 2006 9:15 am

You can change the table index for the air temperature correction, so the highest temperature is around 300 F.

Yes, you can alter values while the car is loaded on the dyno.
Hondata

daveG
Posts: 16
Joined: Tue Aug 16, 2005 5:43 pm

Post by daveG » Sat Feb 11, 2006 1:17 pm

Is there a way to display the IAT value in voltage instead of a temperature value?

Locked