? about the stock B18c5 basemap

s300 and SManager software questions & answers
Locked
tommy7152
Posts: 1
Joined: Tue Feb 21, 2006 9:55 pm

? about the stock B18c5 basemap

Post by tommy7152 » Tue Feb 21, 2006 10:11 pm

Wanted to know about the included basemap for the b18c5 if it was just a stock map, or a dyno tuned map for a stock ITR. And just as a ball park would that be a good starting map for an internally stock 2000 ITR with toda spec-A's and IHE mods. Just as a starting point for tuning. And if there are any others that might due as well. I do have an LM-1 for tuning on road and on the dyno. Just looking for something close so as not to start from scratch. THANKS :)

CivicVTi
Posts: 287
Joined: Mon Dec 15, 2003 1:51 pm
Location: Athens, Greece

Post by CivicVTi » Wed Feb 22, 2006 3:40 am

It is a dyno tuned map. Timing is quite aggressive. If you have raised compression, do not forget to lower timing a couple degrees.

It is a good starting map for your setup.

Locked