Boost solenoid mounting location

s300 and SManager software questions & answers
Locked
Praylewd powr
Posts: 36
Joined: Fri Feb 13, 2004 9:10 am

Boost solenoid mounting location

Post by Praylewd powr » Tue Apr 17, 2007 8:18 am

As per my other post, I wanted a followup to this question:

I originally had my solenoid mounted behind the pass headlight but moved it closer to the wastegate to shorten the vacuum lines to lower boost creep. It seemed to help a bit, but was wondering if mounting the solenoid by the distributor was a poor location heat-wise? Everywhere under the hood is hot so I doubt it would pose an issue, but wanted feedback from Hondata so I don't have to replace the solenoid in the future.

Duane

User avatar
Spunkster
Site Admin
Posts: 18088
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Tue Apr 17, 2007 9:34 am

The firewall is usually a good location for the solenoid.

Locked