Page 1 of 2
How much boost can you build on the S300?
Posted: Sun Jun 03, 2007 8:08 pm
by thudreem
How much boost are you guys building on the 2 step?
Also what settings are you running?
Posted: Sun Jun 03, 2007 8:46 pm
by jew
i build 10 psi with these settings
limiter 5000rpms
activation 4500rpms
fuel 30
timing -30
this is on a d16y8 with a turbonetics t3/t4 ball bearing turbo
Posted: Mon Jun 04, 2007 7:15 am
by thudreem
jew wrote:i build 10 psi with these settings
limiter 5000rpms
activation 4500rpms
fuel 30
timing -30
this is on a d16y8 with a turbonetics t3/t4 ball bearing turbo
DO you know if the spring in the wastegate and what you have the boost controller set at have a factor in how much boost you can build on the 2 step?
Posted: Thu Jun 07, 2007 5:32 am
by kesnut
jew wrote:i build 10 psi with these settings
limiter 5000rpms
activation 4500rpms
fuel 30
timing -30
this is on a d16y8 with a turbonetics t3/t4 ball bearing turbo
do you mind telling me what your timing is (in the map table) that your building boost in.
Posted: Tue Jun 12, 2007 11:00 am
by thudreem
I played with the launch control and can now build 11 lbs with
limiter 7000rpms
activation 6000rpms
fuel 0
timing -10
Posted: Wed Jun 13, 2007 7:38 am
by turbotypeR
mine makes abour 9psi at 7600rpm.fuel and timing are at 0
Posted: Wed Jun 13, 2007 1:24 pm
by thudreem
turbotypeR wrote:mine makes abour 9psi at 7600rpm.fuel and timing are at 0
Does your car pop and crack, shoot flames out the exhaust when the launch control is on like shot guns going off?
Posted: Wed Jun 13, 2007 9:30 pm
by jew
thudreem wrote:turbotypeR wrote:mine makes abour 9psi at 7600rpm.fuel and timing are at 0
Does your car pop and crack, shoot flames out the exhaust when the launch control is on like shot guns going off?
yeah its supposed to do that cause you're dumping a bunch of fuel out the exhaust.
Posted: Wed Jun 13, 2007 9:32 pm
by jew
kesnut wrote:jew wrote:i build 10 psi with these settings
limiter 5000rpms
activation 4500rpms
fuel 30
timing -30
this is on a d16y8 with a turbonetics t3/t4 ball bearing turbo
do you mind telling me what your timing is (in the map table) that your building boost in.
sorry it took so long to reply, i haven't been back to the site in a few days. i'll get a screenshot of my timing maps up for you tomorrow or friday.
Posted: Thu Jun 14, 2007 9:27 am
by Spunkster
no screenshots....post your calibrations and datalogs
Posted: Tue Jun 19, 2007 3:39 pm
by Upperguy
any more info i have yet to use this feature i have msd 2 step now but would love to build good boost so i dont bog
Posted: Wed Jun 20, 2007 6:54 am
by turbotypeR
thudreem wrote:turbotypeR wrote:mine makes abour 9psi at 7600rpm.fuel and timing are at 0
Does your car pop and crack, shoot flames out the exhaust when the launch control is on like shot guns going off?
no it does not.once you start retarding the timing it will
Posted: Wed Jun 20, 2007 6:54 am
by turbotypeR
thudreem wrote:turbotypeR wrote:mine makes abour 9psi at 7600rpm.fuel and timing are at 0
Does your car pop and crack, shoot flames out the exhaust when the launch control is on like shot guns going off?
no it does not.
Posted: Wed Jun 20, 2007 6:55 am
by turbotypeR
turbotypeR wrote:mine makes abour 9psi at 7600rpm.fuel and timing are at 0
no it does not.usually you don't see that until you start retarding the timing
Posted: Wed Jun 20, 2007 6:56 am
by turbotypeR
turbotypeR wrote:mine makes abour 9psi at 7600rpm.fuel and timing are at 0
no it does not.usually you don't see that until you start retarding the timing