Page 1 of 1
Full Throttle Shift & Launch Control keeping Cruise Cont
Posted: Mon Feb 18, 2008 1:48 pm
by C_Rock77
I've been reading up, and see that the FTS and LC can use the clutch switch that's already in the car. My question is how do I use this feature with my S300 and KEEP my full Cruise Control functionality?
From what I understand, you can use the clutch switch for FTS and LC, but it has to be disconnected from it's original use.
How do I accomplish this?
Posted: Tue Feb 19, 2008 1:43 am
by C_Rock77
Nobody can help me with this?
Posted: Tue Feb 19, 2008 10:36 am
by Spunkster
Jumper the wires together that connected to the cruise control switch. Cruise will no longer shut off if you hit the clutch.
Posted: Tue Feb 19, 2008 12:21 pm
by C_Rock77
Spunkster wrote:Jumper the wires together that connected to the cruise control switch. Cruise will no longer shut off if you hit the clutch.
There any way to do it and keep the original functionality of the switch?
Could you tell me in a little more detail what you mean saying to jumper the wires together?
Posted: Tue Feb 19, 2008 12:36 pm
by Spunkster
No.
you take the 2 wires and join them together.
Posted: Tue Feb 19, 2008 1:03 pm
by C_Rock77
Spunkster wrote:
you take the 2 wires and join them together.
The 2 wires of the switch?
Posted: Tue Feb 26, 2008 1:20 pm
by GTMcoupe
C_Rock77 wrote:There any way to do it and keep the original functionality of the switch?
Install a second switch and wire it to an alternative available pin out such as MIL connector, Simple
WEST