Injector Dynamics 1000cc Bosch injector

s300 and SManager software questions & answers
Locked
KING
Posts: 25
Joined: Sat Mar 07, 2009 7:49 pm
Location: jackson tn

Injector Dynamics 1000cc Bosch injector

Post by KING » Sun Mar 22, 2009 7:19 am

hello Im thinking of swapping out my precisions and fjo driver for a set of the new bosch injectors. has anybody had any experience with them? what should I expect to change in my s300 to compensate for the new injectors?
thanks

RedR
Posts: 56
Joined: Tue Apr 11, 2006 2:10 pm
Contact:

Post by RedR » Mon Mar 23, 2009 9:35 am

u will need to change your injector voltage compensation based on your fuel pressure and the supplied sheet that comes with the injectors.

Worked fine for me ;)

FreshDA9
Posts: 252
Joined: Sun Jul 27, 2008 8:40 pm
Contact:

Post by FreshDA9 » Mon Mar 23, 2009 2:19 pm

RedR wrote:u will need to change your injector voltage compensation based on your fuel pressure and the supplied sheet that comes with the injectors.

Worked fine for me ;)
good to know when i buy a set for myself!

locash
Posts: 289
Joined: Sat Mar 20, 2004 11:27 am
Location: Phoenix, AZ
Contact:

Post by locash » Wed Mar 25, 2009 9:30 pm

I use them in all of the high hp cars I tune now.. They work excellent, and unlike RC, or most other injectors, they actually supply the dead time information, so that the car will always run correctly..
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing

airshifter
Posts: 40
Joined: Wed May 18, 2005 7:05 pm
Contact:

Post by airshifter » Thu Mar 26, 2009 10:05 pm

I have had nothing but good luck and the idle is amazing

KING
Posts: 25
Joined: Sat Mar 07, 2009 7:49 pm
Location: jackson tn

Post by KING » Tue Apr 28, 2009 12:06 am

RedR wrote:u will need to change your injector voltage compensation based on your fuel pressure and the supplied sheet that comes with the injectors.

Worked fine for me ;)

how do I go about changing the voltage compensation?

RedR
Posts: 56
Joined: Tue Apr 11, 2006 2:10 pm
Contact:

Post by RedR » Wed Apr 29, 2009 7:07 am

adjust it according with your BASE fuel pressure.

Read the sheet that came with the injectors

KING
Posts: 25
Joined: Sat Mar 07, 2009 7:49 pm
Location: jackson tn

Post by KING » Wed Apr 29, 2009 8:34 am

RedR wrote:adjust it according with your BASE fuel pressure.

Read the sheet that came with the injectors
yeah Im still a little lost here. my injectors came in today and Im looking at the paper but still no clue.

KING
Posts: 25
Joined: Sat Mar 07, 2009 7:49 pm
Location: jackson tn

Post by KING » Wed Apr 29, 2009 1:21 pm

ok I think i got it figured out now....

KING
Posts: 25
Joined: Sat Mar 07, 2009 7:49 pm
Location: jackson tn

Post by KING » Wed Apr 29, 2009 4:58 pm

got the injectors installed changed the voltage compensation then a little tuning later the car was running just as good as before.

Locked