Smanager wish list

s300 and SManager software questions & answers
V-Spec race development
Posts: 192
Joined: Wed Aug 22, 2007 12:41 am

Post by V-Spec race development »

kesnut wrote:develop the romeditor cable to work with the s300 software, tune with your s300 save it as a bin an burn it to a rom for s200 and s100,

one software to rule them all
I would like to see this as well as I tune both.
V-Spec race development
Posts: 192
Joined: Wed Aug 22, 2007 12:41 am

Post by V-Spec race development »

T66crx wrote:I would also like to see the ability to lock the chip with a password so no one can open or download the file unless used with a password
I agree to that and cannot be modified by someone that don't know what they are doing and mess up the tune and blame the tuner for what happen to their motor.
V-Spec race development
Posts: 192
Joined: Wed Aug 22, 2007 12:41 am

Post by V-Spec race development »

Manny1987 wrote:In Crome Pro theres options to select certain injector information. For example High or Low impedance injectors and the voltage compensations, & by manufacturer.That way everything is dialed in for you as far as MS's and dead times etc. Is there any ideas of ever making or adding an options like this for at least a majority of the leading injector manufacturers. I know theres compensations but maybe this would help many people tune there cars.
I would love to see this implemented as I'm using 1600cc injectors and thinking of getting even bigger and it's a pain in the neck w/o having to know the dead time and voltage value etc.
allm0t0rGSR
Posts: 116
Joined: Tue Jun 23, 2009 10:51 pm

Post by allm0t0rGSR »

rev limiter and shiftlight for every gear 1-5 like neptune have would be great...
hdragster
Posts: 43
Joined: Sat Feb 14, 2009 10:38 am

Post by hdragster »

Hondata already features shift light and rev limiter you just have to put it on!
hdragster
Posts: 43
Joined: Sat Feb 14, 2009 10:38 am

Post by hdragster »

Corrected 02 wideband reading
allm0t0rGSR
Posts: 116
Joined: Tue Jun 23, 2009 10:51 pm

Post by allm0t0rGSR »

hdragster wrote:Hondata already features shift light and rev limiter you just have to put it on!
i know but what im trying to say is that every gear single gear, u can set diff rev or shiftlight each gear...
Tsuchinoko
Posts: 140
Joined: Fri Jan 25, 2008 4:38 am

Post by Tsuchinoko »

A diferent color for the cell you already change the value. Like this you will know that you already change that specific cell.

Thanks
Those who know don't tell, and those who tell don't know.
ehhbuddy
Posts: 1
Joined: Wed Aug 18, 2010 3:24 pm

Post by ehhbuddy »

Ability to have a hotkey to implement all recommended changes then we can adjust from the recommendations this would save alot of time.
lowblow
Posts: 86
Joined: Thu Dec 10, 2009 2:19 pm
Location: bay area ,CA

Post by lowblow »

is there any where for S300 work together with after market EGT sensor ?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

lowblow wrote:is there any where for S300 work together with after market EGT sensor ?
It has had this option for a number of years. http://www.hondata.com/help/smanager/se ... alog+input
Luke
Posts: 249
Joined: Thu Mar 26, 2009 10:24 am
Location: Dorsten/Germany

Post by Luke »

the O2 reading should be better.

when putting in a wideband i always have to look for a offset.

can't that be fixed somehow?! it costs some time each time, before tuning.

best regards Lukas
lowblow
Posts: 86
Joined: Thu Dec 10, 2009 2:19 pm
Location: bay area ,CA

Post by lowblow »

Thanks ! Spunkster , which EGT sensor best combination ?
for input analog 2: R2 and R3 need removed replace with 1 or 2 1N4148 diodes ?
PLEASE !
Luke
Posts: 249
Joined: Thu Mar 26, 2009 10:24 am
Location: Dorsten/Germany

Post by Luke »

@lowblow: i recommend the PLX EGT-sensorbox, because it give you an output from 0-5V.

for the using the input, you should read the helpfile. it's written there exactly what you have to do, that it works properly.

best regards Lukas
lowblow
Posts: 86
Joined: Thu Dec 10, 2009 2:19 pm
Location: bay area ,CA

Post by lowblow »

THO CHER LAY ! (THANK YOU VERY MUCH ) in chinese cantonese
my MECHINE gonna run SMARTER with all this SENSOR !
Locked