i ordered a s100 and it didn't include a basemap like it was supposed to, so i was wondering if someone could help me build a basemap using romeditor v4? it's a vitara build Z6, FJspec custom length I beams, zex 59300, holset HX35, precision 880's, and GM 3 bar MAP sensor.. if anyone could help me, i'd GREATLY appreciate it..
i started out with the D16supercharged map that's already in the romeditor, changed the injector output from 440 to 880, and changed the map from the stock to the motec 3 bar (hondata says output on GM 3 bar at atmostpheric is 1.6v, and motec's output at atmospheric is 1.66v)
can someone help me with a basemap?
Hondata installation questions / answers / issues.
-
- Posts: 2
- Joined: Sat Nov 28, 2009 6:47 pm
Jump to
- General
- ↳ Hondata News
- ↳ Applications
- ↳ Non-Hondata
- s100/s200/s300
- ↳ s300 / SManager
- ↳ S300 Calibrations
- ↳ SManager Display Templates
- ↳ s100/s200
- ↳ Romeditor 4 Software
- ↳ HondaLogger Software
- ↳ Coil Pack Retrofit
- K-Series
- ↳ K-Pro / KManager
- ↳ K-Pro Calibrations
- ↳ KManager Display Templates
- ↳ K-Series Reflash
- FlashPro
- ↳ FlashPro Manager
- ↳ FlashPro Calibrations
- ↳ Accord 2008+ FlashPro
- ↳ Civic Si 2006-2011 Americas
- ↳ Civic Si 2012-2015 US/Canadian / 2013+ ILX
- ↳ Civic Type R 2006-2010 Japanese FD2
- ↳ Civic Type R 2007-2011 European FN2
- ↳ Civic Type R 2015+
- ↳ Civic 2016+ 1.5 Turbo Americas/Asia
- ↳ CRV 2017+
- ↳ CR-Z 2010-2012 US/Europe/Asia
- ↳ Fit 2007-2008
- ↳ RDX 2007-2012
- ↳ S2000 2006-2009 Americas/Europe/Asia
- ↳ TL 2007-2008
- ↳ TSX 2004-2014
- Traction Control
- ↳ General / Traction Control Manager Software
- ↳ Traction Control with S300
- ↳ Traction Control with KPro
- ↳ Traction Control with FlashPro
- Bluetooth Mobile Apps
- ↳ Hondata Mobile