s200 hondata for burning chip

Hondata installation questions / answers / issues.
Post Reply
bseriesluver
Posts: 14
Joined: Tue Oct 13, 2009 10:13 am

s200 hondata for burning chip

Post by bseriesluver » Sat Jan 23, 2010 8:58 am

i have s200, and i have updated with the cable. i have not install s200 on the my car yet. i have not tune my car yet, but i have socket everything in my ecu p28. ok i opened the base map with romeditor 4 and i go to save as and save file as bin file then i used burn1 chip programmer and burned the basemap down. after that i use the eprom chip plug in the ecu, the car start fine but i cant rev up to 5k rpm. so will you let me know y is that, and do i have to hook the s200 blue box along with ecu or not?
note: i thought that i just burn the chip and plug and play as crome did.
thank you

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Mon Jan 25, 2010 10:59 am

What is the Romeditor4 serial number?

bseriesluver
Posts: 14
Joined: Tue Oct 13, 2009 10:13 am

Post by bseriesluver » Thu Feb 18, 2010 12:09 am

what do u mean by romeditor4 serial number?

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Tue Feb 23, 2010 11:18 am

If you have not purchased Romeditor 4 then you cannot save or burn files. I would highly recommend just upgrading to the s300 if you wish to tune yourself, as it will be easier and cheaper and has more features.

http://www.hondata.com/s300upgradeform.html

Post Reply