Hondata • View topic - s200 launch control

View unanswered posts | View active topics

Board index » s100/s200/s300 » s100/s200

All times are UTC - 8 hours [ DST ]

s200 launch control

Page 1 of 1

[ 5 posts ]

Previous topic | Next topic

Author

Message

fry

Post subject: s200 launch control

Posted: Mon Sep 13, 2010 6:48 pm

Joined: Mon Sep 13, 2010 6:46 pm
Posts: 3

I called hondata today, my launch control isn't working and all the options short of g sensor are enabled. when i open re4 and datalog and go to the launch control option, everything is greyed out, BUT it shows the RPM I have the launch control set to. I set my shift light just fine, but my launch control is not working. when I open up to see my sensor readings and push in the clutch, it see's that the switch is on. any help would be appreciated.

Top

Spunkster

Post subject:

Posted: Tue Sep 14, 2010 10:42 am

Site Admin

Joined: Fri Sep 20, 2002 5:06 pm
Posts: 11078
Location: Hondata

Post your calibration and a datalog showing the problem.

Top

fry

Post subject:

Posted: Tue Sep 14, 2010 3:53 pm

Joined: Mon Sep 13, 2010 6:46 pm
Posts: 3

Top

Spunkster

Post subject:

Posted: Tue Sep 14, 2010 4:35 pm

Site Admin

Joined: Fri Sep 20, 2002 5:06 pm
Posts: 11078
Location: Hondata

don't post screenshots. You must post the calibration you are using and a datalog showing the problem.

Top

fry

Post subject:

Posted: Tue Sep 14, 2010 6:51 pm

Joined: Mon Sep 13, 2010 6:46 pm
Posts: 3

Spunkster wrote:

don't post screenshots. You must post the calibration you are using and a datalog showing the problem.

i dont know what that is

Top

Page 1 of 1

[ 5 posts ]

Board index » s100/s200/s300 » s100/s200

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: