do i need an S100 or the S300

Hondata installation questions / answers / issues.
Post Reply
jtkc
Posts: 3
Joined: Sat Oct 19, 2013 7:00 pm

do i need an S100 or the S300

Post by jtkc » Fri Jan 17, 2014 11:33 pm

hello

new to tuning and modified imports that need a dyno tune.

i was wondering with the modifications done to my engine, if i need just the S100 or if i need the S300

the platform is a B17a1 in a 1990 Acura Integra LS

here is a list of mods done to the engine

Aspiration - N/A

Air intake - AEM short ram
Throttle Body - Professional Products 65mm
Intake Manifold - Professional Products Whirlwind GSR intake
AEM - High Flow Fuel Rail
Fuel Injectors - Acura RDX 410cc injectors

Head and cams are stock spec

Block
- JE 12.5:1 pistons
- ACL Race series main and rod bearings
- Micro-polished and balanced crankshaft

Exhaust
- no name aftermarket 4-2-1 2 piece header

- OBD1 O2 sensor
- Stock fuel pump
- stock fuel pressure regulator

is this enough information to determine which hondata unit i need for the engine to run properly

i am on a budget and this will be my daily driver, ive been without a car for over 6 months now trying to get this car road worthy. YES of course id love to buy the S300, BUT is it truly necessary for my applications

User avatar
Spunkster
Site Admin
Posts: 17764
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: do i need an S100 or the S300

Post by Spunkster » Mon Jan 20, 2014 10:32 am

To use a Hondata system, you will need to use a compatible OBD1 ecu from the list at http://www.hondata.com/ecus.html . You can then use the Hondata s100 or s300 depending on what options you want ( http://www.hondata.com/sproducts.html ). I would recommend the s300.

Post Reply