P28 Tuning Issues

Hondata installation questions / answers / issues.
Locked
UntunedCivic
Posts: 2
Joined: Tue Nov 26, 2002 6:20 pm

P28 Tuning Issues

Post by UntunedCivic »

Help! I have a P28 OBDI ECU and I cannot connect to it via the Emulator! I was told there are some problems with Hondata connecting to a P28 ECU, is this true?

I shouldn't have to keep burning chips over and over once I'm at the dyno!

Has anyone else experienced this issue?
hybridsol
Posts: 32
Joined: Sat Aug 24, 2002 8:17 pm
Location: Delaware
Contact:

Post by hybridsol »

I haven't had any probelms with the emulator, (pocket programmer 2 + rev 2? ROM editor). ther is a probelm on some laptops, you need to have the emulator (programmer) connected to the laptop (not ECU) on boot-up AND I need to start the programmer software before it will work (IBM thinkpad w/win 95)

Sean
2002 AP1
UntunedCivic
Posts: 2
Joined: Tue Nov 26, 2002 6:20 pm

P28 Tuning

Post by UntunedCivic »

Thanks! I'll give that a try. I was using a Thinkpad w/ XP! I'll try a different machine and boot up sequence!
Locked