Launch Control Removal

Hondata installation questions / answers / issues.
Locked
Trent009
Posts: 3
Joined: Sat Aug 01, 2009 6:35 pm

Launch Control Removal

Post by Trent009 »

Hi from Australia,

I have a Hondata s200 with the launch control option activated at 4000rpm

The problem is that I need to pass a noise test on my car. This is done by revving it to 5400 rpm in neutral. However the launch control feature limits these rpms.

How do I go about removing the launch control?

Thanks

User avatar
Spunkster
Site Admin
Posts: 18152
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

Was the s200 tuned with Romeditor 3 or 4?

wackyprelude
Posts: 11
Joined: Tue Nov 25, 2008 4:41 pm

Post by wackyprelude »

Is it for smog (emmissions test)? Can't he just unplug it for the duration of the noise test?

Trent009
Posts: 3
Joined: Sat Aug 01, 2009 6:35 pm

Post by Trent009 »

I'm not too sure what the tuner used, I just paid the guy, now can't get in contact with him anymore.

The test is a noise test but should it be suspect, it will go in for emissions testing.

Is there a difference between RomEditor 3 or 4?

Thanks for the replies

User avatar
Spunkster
Site Admin
Posts: 18152
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

Yes it is different. The clutch switch is connected differently an dthere are settings in the software that are different.

Trent009
Posts: 3
Joined: Sat Aug 01, 2009 6:35 pm

Post by Trent009 »

That's strange. I don't have a clutch switch connected to the ecu or hondata box.

I can rev to 9k in all gears except neutral.

Locked