1000cc base map

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
jetspeedz
Posts: 62
Joined: Sun Nov 01, 2009 1:33 pm

1000cc base map

Post by jetspeedz » Sun Feb 21, 2010 10:45 am

Guys anyone have a 1000cc base map for a 9.8:1 gsr motor roughly, i need just a decent base to get the car to the dyno for a full tune with the turbo. I got a 1000cc map already from the tuner but it was the only one he had and it might be off. if there are others that will let the car idle and run off boost to get me to the dyno that is even better then what i got i would appreciate it.

thanks

For anyone interested here is the map i got
Attachments
basemap.skl
(38.98 KiB) Downloaded 463 times

turbotypeR
Posts: 170
Joined: Sun Nov 19, 2006 12:10 am

Post by turbotypeR » Sun Feb 21, 2010 5:54 pm

All you need to do is go into fuel trim and input the stock injector size and the new injector size and it should idle just fine.
92 civic Si
best et:9.43best mph:164

jetspeedz
Posts: 62
Joined: Sun Nov 01, 2009 1:33 pm

Post by jetspeedz » Sun Feb 21, 2010 9:21 pm

Thanks a lot, excuse my ignorance I'm just getting familiar with Smanager. Is the fuel trim/injector option in the Parameters?

jetspeedz
Posts: 62
Joined: Sun Nov 01, 2009 1:33 pm

Post by jetspeedz » Sun Feb 21, 2010 10:27 pm

Ok i found it in parameters section. Thanks a lot

Post Reply