Here is a base map for LS/vtec

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
TeGG3r
Posts: 2
Joined: Mon Feb 22, 2010 12:54 am
Location: GA

Here is a base map for LS/vtec

Post by TeGG3r » Thu Apr 01, 2010 9:06 am

B18b bottom
b16 head
440 injectors
Stock map

hope this helps some people.
Attachments
ls-vtec440cclstransp28.skl
(36.99 KiB) Downloaded 1120 times

SM0K3YMOUNT41N
Posts: 4
Joined: Thu Aug 11, 2016 6:47 am

Re: Here is a base map for LS/vtec

Post by SM0K3YMOUNT41N » Tue Aug 16, 2016 6:03 am

Has anyone tried this? How did it work for you? I have a running way to rich issue and I cannot even drive mine without it dying and leaving me embarrassed on the side of the road. Btw I'm in Colorado would it be OK with this 5000 ft elevation?

civicrocker
Posts: 5
Joined: Thu Jun 04, 2015 9:55 am

Re: Here is a base map for LS/vtec

Post by civicrocker » Thu Aug 18, 2016 10:48 pm

Sorry for the delay. Yes I did try this tune and the tunes that say they are for lsvtec but all ran like crap! I am now breaking my car in with the p72 tune but I increased the fuel trim 5%. I also found I had to increase the duty cycle of the IATC abit. I now have 500 kilometres (310 miles) on it! What is your setup exactly?

SM0K3YMOUNT41N
Posts: 4
Joined: Thu Aug 11, 2016 6:47 am

Re: Here is a base map for LS/vtec

Post by SM0K3YMOUNT41N » Fri Aug 19, 2016 7:45 am

I have a b16 head that has been milled resurfaced. B18b JDM bottom stock pistons 440cc inj, i/h/e. I'm running so rich the car won't rev up

ElisamuelRamirez
Posts: 1
Joined: Thu Aug 18, 2016 5:23 pm

Re: Here is a base map for LS/vtec

Post by ElisamuelRamirez » Fri Aug 19, 2016 11:42 am

i start my car in stock base map and the mix go down to 10.0 what can i do

Post Reply