phearable.net basemap rich idle/lean wot..

burmese434 · Post by **burmese434** » Thu Dec 02, 2010 12:29 am

Ya it should. Just wondering on different compression

ldbriggins · Post by **ldbriggins** » Tue Jan 11, 2011 8:40 pm

Hey Burmese I seem to be having problems with this basemap can you help I rebuilt the motor upgraded to Type r Cams when I crank it i get a carbon chokey smell garage is kinda blackish(not very dark).. timing is in sync this is the datalog I get when i crank it up.
Motor set-up
B18a1 81.5mm
9.0:1 piston
eagle rods
b18c1 head
type r cams
gt30 .70/.63
Lc-1 wideband

burmese434 · Post by **burmese434** » Wed Jan 12, 2011 12:01 am

call or text me and I'll help ya 614-390-4512 anytime

Check you cam timing, your vacuum looks alittle low. My setup is for 1000cc injectors. Put 1000 in the stock injector size and put 750 current injector size. Go to overall fuel trim and put that at 0. Start your car and see where your a/f is at. If it's still to rich put like -5 and so on till you get it to idol and take gas good. Is that a gt30r dbb turbo? If so your going to have to change the fuel curve because that turbo will start to spool quicker the the turbo on my setup so be very careful.

ldbriggins · Post by **ldbriggins** » Wed Jan 12, 2011 12:20 am

Will do right now its 1:19Am(dark morning lol), so ill call you when i Get of later this morning.. :)

burmese434 · Post by **burmese434** » Wed Jan 12, 2011 12:28 am

ldbriggins wrote:Will do right now its 1:19Am(dark morning lol), so ill call you when i Get of later this morning.. :)

Sounds good If I dont answer just leave a voice mail and Ill call you back.

ldbriggins · Post by **ldbriggins** » Wed Jan 12, 2011 4:23 pm

Fixed was a vacuum leak

ldbriggins · Post by **ldbriggins** » Thu Jan 20, 2011 8:28 pm

heeres a short run

ldbriggins · Post by **ldbriggins** » Sun Feb 06, 2011 2:26 pm

Heres my calibration & Datalog
car smells really rich at idle, but a/f looks fine at idle

AREA876 · Post by **AREA876** » Sun Feb 06, 2011 7:06 pm

Datalog shows TPS at 5% why is that?

ldbriggins · Post by **ldbriggins** » Sun Feb 06, 2011 11:21 pm

I have no clue?

AREA876 · Post by **AREA876** » Mon Feb 07, 2011 5:15 am

Your TPS needs adjustment

cutaoden · Post by **cutaoden** » Mon Mar 21, 2011 10:01 pm

damn i tried to use your basemap on my setup and fucked shit up lol. iono what the problem is we have a similar setup, but now my car wont stay running. it starts up then dies.

did you figure out anything new on your map?

ldbriggins · Post by **ldbriggins** » Tue Mar 22, 2011 4:24 pm

did you set all your parameters up? if so it should crank right on up... make sure you run this in open loop until you get tuned...

cutaoden · Post by **cutaoden** » Wed Mar 23, 2011 1:16 pm

yeah did set everything up but it could be the injector wiring or vaccum leak....got to figure that out first i guess.

cutaoden · Post by **cutaoden** » Tue Mar 29, 2011 9:22 pm

well it was running on all four cylinders on the old base map i had but i uploaded this one and now it wont run on all four cylinders. wonder why...