Need b16a2 turbo basemap

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Redsi15
Posts: 8
Joined: Fri Sep 23, 2011 5:37 pm

Need b16a2 turbo basemap

Post by Redsi15 » Wed Apr 18, 2012 11:24 am

Hey fellas, Looking for a base map for my fully built b16 setup
Manley H beam rods
CP 10.5:1 pistons b16a2 .02mm over
Supertech Nitrate coated racing valves, titanium retainers, dual racing springs locks
Gsr Cams
60 trim t3/t4 turbo
38mm tial wastegate
2.5" downpipe
percision 1000cc injectors

Let me know if anymore info is needed

dneil_27
Posts: 20
Joined: Sun Dec 26, 2010 3:59 am
Location: malaysia

Re: Need b16a2 turbo basemap

Post by dneil_27 » Tue Apr 24, 2012 8:19 pm

monitor ur air/fuel while u using this cal.

Ar50 t3/t4 turbo
supercharge 81.5mm piston
21 psi of boost
Attachments
Copy of b16 turbo 510cc.skl
(36.7 KiB) Downloaded 291 times

Redsi15
Posts: 8
Joined: Fri Sep 23, 2011 5:37 pm

Re: Need b16a2 turbo basemap

Post by Redsi15 » Tue May 15, 2012 11:03 am

Does anyone have any other maps to help me get started? closer to 1000cc injectors. this the map i made. Let me know if anything needs changed. I got deadtime and volts from injector rehab
Attachments
new b16.skl
(39.44 KiB) Downloaded 207 times

Post Reply