need b20z 60-1 rc550 map please

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

need b20z 60-1 rc550 map please

Post by ef8904 »

stock 00 crv ex bottem
96 integra ls head
turbonetics 60-1
log manifold
walbro 255
rc550
stock fpr
aem fuel rail


any help would be greatley appreciated, cant seem to find a stock b20 turbo map

throwdown
Posts: 6
Joined: Wed Oct 23, 2013 4:54 pm

Re: need b20z 60-1 rc550 map please

Post by throwdown »

I can give you a base map but it would only be to start the car and drive it to be tuned...I don't recommend any WOT pulls just lmk

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need b20z 60-1 rc550 map please

Post by ef8904 »

hey i apprectiate the help. here are my datalogs and the map i guess from what i started with. b20 stock map created boost tables then added 20 % fuel in column 7 and 10
Attachments
b20zrc55060-1.s3d
here is a datalog
(3.97 MiB) Downloaded 108 times
2nd morning.skl
here is the map
(40.61 KiB) Downloaded 105 times

throwdown
Posts: 6
Joined: Wed Oct 23, 2013 4:54 pm

Re: need b20z 60-1 rc550 map please

Post by throwdown »

I would take it straight to your local tuner
Attachments
b20550.skl
(40.75 KiB) Downloaded 105 times

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: need b20z 60-1 rc550 map please

Post by keto06 »

I actually just tuned a B20 Turbo on the dyno yesterday. I will post the map when i get home.
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: need b20z 60-1 rc550 map please

Post by keto06 »

He made like 236/219 @ 9lbs on a Mustang Dyno.

We kept the map fairly conservative and its tuned for a daily driver on 93 octane.

AFRS are around 11.3-11.5 across the board in boost.
Attachments
b20T550sTuned.skl
(38.04 KiB) Downloaded 157 times
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need b20z 60-1 rc550 map please

Post by ef8904 »

Thanks for the quicl reply, ill flash my ecu and update later tonight. Can't wait!

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need b20z 60-1 rc550 map please

Post by ef8904 »

Anything I should do aside from relearning TPS, turned wideband input on ELD and timing at 16? RC injector dead times? Should I tun open or closed loop?

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need b20z 60-1 rc550 map please

Post by ef8904 »

Worked out well! Switched to a colder plug and runs great WOT. Which turbo was it running?

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: need b20z 60-1 rc550 map please

Post by keto06 »

Awesome.

Always open loop.

6s or 7s? This was tuned on 6s. Forgot to mention that.

If you hookup the wideband, post a log. Id like to see it.

It was running a GT35.
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need b20z 60-1 rc550 map please

Post by ef8904 »

i went with 7s. i believe my WG has a 7lb spring as well. Was that a low or high compression b20? does it have headstuds? ill drive the car tonight and do my best to log it. thanks again for the help, car is a blast to drive now!

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: need b20z 60-1 rc550 map please

Post by keto06 »

7s should work, though I think youd be fine with 6s.

I believe its a completely stock B20 out of a CRV. They might have put in headstuds but I dont think so. Stock intake mani, log style turbo mani. Very simple build overall but he likes it.

Should be fine running 7lbs.
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: need b20z 60-1 rc550 map please

Post by keto06 »

Datalog?
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need b20z 60-1 rc550 map please

Post by ef8904 »

here ya go. sorry it took so long, i only have a computer with net at work. hopefully this worked properly
Attachments
tues morning work ride.s3d
(3.25 MiB) Downloaded 96 times

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need b20z 60-1 rc550 map please

Post by ef8904 »

actually after reviewing my own log that is probably no help. ill try again tonight and find an open road to pull in 4th

Post Reply