need a map for 83mm gsr b16 head 9:1

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

need a map for 83mm gsr b16 head 9:1

Post by ef8904 »

its a sleeved LS 83mm bore and a gsr crank eagle rods 9:1 cp pistons rc550s walbro 255
stock fpr aebs intake manifold stock b16 head gsr cams just need a basemap to drive 40 miles to get a tune. thanks in advance!

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need a map for 83mm gsr b16 head 9:1

Post by ef8904 »

bumppp

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need a map for 83mm gsr b16 head 9:1

Post by ef8904 »

anyone?

tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Re: need a map for 83mm gsr b16 head 9:1

Post by tkane4389 »

I cleaned up the kal for you. Pm me for more info
Attachments
gsr 2.0.skl
(39.32 KiB) Downloaded 111 times

ef8904
Posts: 23
Joined: Wed Feb 19, 2014 11:28 am

Re: need a map for 83mm gsr b16 head 9:1

Post by ef8904 »

gonna drive the crx 45 miles to a dyno today.
Attachments
c5tunelog.s3d
heres my log after the new map
(5.68 MiB) Downloaded 92 times
b18c5 after injector.skl
this is one of the maps from the vault which i changed injector and dead times for rc550. b18c5 9:1
(39.97 KiB) Downloaded 106 times

Post Reply