b18c1 with mods need a calibration to work with plz help

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Civic Duty
Posts: 3
Joined: Sun May 25, 2014 4:33 pm

b18c1 with mods need a calibration to work with plz help

Post by Civic Duty » Sun May 25, 2014 4:39 pm

ok here are the specs

b18c1 bored to 81.5
LS crank(balanced)
LS Eagle h beam rods
81.5 10.1 wiseco pistons
Delphi 440 injectors
skunk2 IM
cold air intake
tri y header
WS2 exhaust

I will be boosting it a lil later but for now that is all


so if anyone has a good map I could download that would be great thank you

Civic Duty
Posts: 3
Joined: Sun May 25, 2014 4:33 pm

Re: b18c1 with mods need a calibration to work with plz help

Post by Civic Duty » Tue May 27, 2014 1:12 am

bump guys a starting point better than stock would be awesome thanks

keto06
Posts: 499
Joined: Fri Jul 17, 2009 9:29 pm

Re: b18c1 with mods need a calibration to work with plz help

Post by keto06 » Sun Jun 01, 2014 5:20 pm

My tune from this thread would be better than stock.

http://www.hondata.com/forum/viewtopic.php?f=20&t=16050

Just change injectors to 440s and add maybe 5% on the top end for safety. That will get you around until you boost/tune/etc.

Also I recommend getting a CTR intake cam if you can. Works great with a stock GSR head and ever better once boosted. Cheap but solid upgrade.
07 Civic Si Sedan
Drop-In Filter, Berk HiFlow Cat, 2.5" exhaust, 60a rear mount, Mugen Sport Suspension, FlashPro Tuned by me.
14.6@97 (full weight)
Hit me up for free Hondata Help!

Civic Duty
Posts: 3
Joined: Sun May 25, 2014 4:33 pm

Re: b18c1 with mods need a calibration to work with plz help

Post by Civic Duty » Sun Jun 01, 2014 10:27 pm

keto06 wrote:My tune from this thread would be better than stock.

http://www.hondata.com/forum/viewtopic.php?f=20&t=16050

Just change injectors to 440s and add maybe 5% on the top end for safety. That will get you around until you boost/tune/etc.

Also I recommend getting a CTR intake cam if you can. Works great with a stock GSR head and ever better once boosted. Cheap but solid upgrade.

awesome man thank you and any idea where i could source the cam?(i have not looked yet)

also just downloaded it i will put it to use as soon as i can get a laptop

Post Reply